Chicago Electric 95960, Инструкции по установке, эксплуатации и обслуживанию

Страница: 2 / 27

Page 2 SKU 95960 For technical questions, please call 1-800-444-3353.
SPEciFicATiONS
Electrical Requirements
7000 Watts (Rated) / 7500 Watts (Maximum) / 60 Hz / 3600 RPM
Output Receptacles:
20 A / 120 V~ / 3-Prong / (Qty. 1 Duplex) with a 20 A Circuit Breaker
30 A / 120 V~ / 3-Prong Twist Lock / (Qty. 1) with a 30 A Circuit Breaker
30 A / 240/120 V~ / 4-Blade Twist Lock / (Qty. 1) with two 30 A Circuit Breakers
input Power: 12 VDC Battery / 7-1/4” Long x 3” Wide (not included) with an In-Line
Circuit Breaker
voltmeters:
0 < - > 150 Volts / 50 Volt Marked Increments
0 < - > 300 Volts / 100 Volt Marked Increments w/50 Volt Hash Marks
Engine Specifications
16 HP / 4 Cycle / Air Cooled / Electric & Recoil Start / 3600 RPM
420cc Displacement / 6.6 Gallon Fuel Tank
Powered with Mid to High Octane, Unleaded Gasoline
Engine Family: 5CSG.41925C
Recommended Oil:
37 Fluid Ounces
SAE 30W (Above 32 Fahrenheit) / SAE 5W-30 (Below 32 Fahrenheit)
Recommended Spark Plug Gap: 0.028” ~ 0.031”
Estimated Run Time: 8 Hours @ 50% Load
Automatic Low Oil Shutdown
Additional Features Locking ON/OFF with 2 Keys
Overall Dimensions 24-1/8” Long x 20-1/2” Wide x 24-1/2” High
Net Weight 188 Pounds
iMPORTANT! This product requires oil and fuel to be added before starting. Attempt-
ing to start the Engine without oil WILL ruin the Engine and void the warranty.
NOTE: The Engine’s carburetor may need to be adjusted by a qualified mechanic for
efficient high-altitude use.
The emission control system for this Generator’s Engine is warranted for standards
set by the U.S. Environmental Protection Agency and by the California Air Resources
Board (also known as CARB). For warranty information, refer to the last pages of this
manual
SAvE THiS MANuAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Write the product’s serial number in the back of the manual near the as-
sembly diagram, or write month and year of purchase if product has no number. Keep
this manual and invoice in a safe and dry place for future reference.