Chicago Electric 95960, Инструкции по установке, эксплуатации и обслуживанию

Страница: 17 / 27

Page 17 SKU 95960 For technical questions, please call 1-800-444-3353.
Measure the electrode gap with a suitable gauge. The gap should be 12. 0.028” to
0.031” . If necessary, correct the gap by carefully bending the side of the elec-
trode.
(See Figure i.)
Reinstall the Spark Plug (28A) carefully to avoid cross-threading. 13. (See Figure i.)
daily: 14. Inspect the Fuel Filter (32).
FuEL TANK (31)
FuEL TANK
GAuGE
FuEL TANK cAP (34)
FuEL FiLTER (32)
FiGuRE J
15. To do so, remove the Fuel Tank Cap (34) from the Fuel Tank (31).
(See Figure J.)
If necessary, use compressed air to remove any dirt and debris from the Fuel Filter 16.
(32). Then replace the Fuel Filter and Fuel Tank Cap (34). (See Figure J.)
When storing the Generator for extended periods: Before storing, drain all fuel
out of the Engine’s Fuel Tank (31). If this is not followed, old fuel in the Fuel Tank
may clog the Carburetor of the Engine and prevent it from starting until cleaned
out. Then make sure to store the unit in a clean, dry, safe location out of
reach of children and other unauthorized people.
PLEASE REAd THE FOLLOWiNG
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUY-
ER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.