Page 4
SKU 95887
for technical questions, please call 1-800-444-3353.
tool use and Care
do not use this oven if the Power switch does not turn it on or off.
If the
Powder Coat Oven cannot be controlled with the Power Switch, it is dangerous and
must be replaced.
disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing this oven such preventive
safety measures reduce the risk of starting the oven accidentally. always
unplug the oven and let it cool down completely before performing any in-
spection, maintenance, or especially cleaning procedures.
this oven is dangerous in the hands of untrained users.
Never allow children
to come in contact with this product.
Maintain this Powder Coat oven with care. keep the oven clean.
Do not use
this Oven if damaged in any way. Tag it, “Do not use” until repaired.
Check for any other condition that may affect the oven’s operation. if dam-
aged, have the oven serviced before using.
Many accidents are caused by
poorly maintained equipment.
serViCe
service to this Powder Coat oven must be performed only by qualified repair
personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.
follow instructions in the
“Inspection, Maintenance, And Cleaning”
section
of this manual.
Failure to follow maintenance instructions may create a risk of
electric shock or injury.
sPeCifiC safety rules
Maintain labels and nameplates on the tool.
These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment.
Make sure there is adequate surrounding
workspace. Use this Oven only in a well ventilated area. Avoid high traffic areas
where it could be accidently touched while it is hot. Do not allow anyone to conduct
any activities near the Oven while it is in use, or closely following it’s use while it is
still hot. Always keep the work area free from obstructions, grease, oil, trash and
other debris.
neVer use this oven near flammable chemicals, dusts, and va-
pors.
Do not use this product in a damp or wet location.
Proper location is imperative.
This Powder Coat Oven should be placed on a fire
retardant table or stand approximately 36” above floor level to make loading and
unloading easy. It should be protected from direct sunlight or drafts. Make sure the
1.
2.
3.
4.
5.
1.
2.
1.
2.
3.
