background image

Page 3

SKU 95887

for technical questions, please call 1-800-444-3353.

always use eye, hand and body protection. 

Always wear ANSI-approved safety 

goggles or full face shield and dust mask/respirator. Always wear fire retardant, heat 
proof work gloves, a full length fire retardant apron, long sleeve shirts, long pants 
and hard toed leather shoes. 

do not operate oven in explosive atmospheres, such as in the presence of 
flammable liquids, gases, or dust.  

Extreme temperatures from Oven may ignite   

fumes.

keep bystanders, children, and visitors away while operating. 

Protect others, 

provide barriers or shields as needed.

eleCtriCal safety

grounded equipment must be plugged into an outlet properly installed and 
grounded in accordance with all codes and ordinances.  never remove the 
grounding prong or modify the plug in any way.  do not use any adapter plugs.  
Check with a qualified electrician if you are in doubt as to whether the outlet 
is properly grounded.

  If the Oven should electrically malfunction or break down, 

grounding provides a low resistance path to carry electricity away from the user.

use only indoors, do not expose to rain or wet conditions.  

Water entering the 

Powder Coat Oven will increase the risk of electric shock.

do not abuse the Power Cord.  never use the Power Cord to pull the Plug 
from an outlet.  keep the Power Cord away from heat, oil, and sharp edges.  
replace damaged Power Cords immediately.

  Damaged Power Cords increase 

the risk of electric shock.

Personal safety

stay alert.  watch what you are doing, and use common sense when operating.  
do not use this oven while tired or under the influence of drugs, alcohol, or 
medication.

  A moment of inattention while operating may result in burns and/or 

other serious personal injury.

dress properly.  do not wear loose clothing or jewelry.  Contain long hair.  keep 
your hair, clothing, and gloves away from from over surfaces.

  Loose clothes, 

jewelry, or long hair can be caught doors or vent fans.

avoid accidental starting.  be sure the Power switch is off before plugging 
in. 

do  not  overreach  when  loading/unloading  this  Powder  Coat  oven.    keep 
proper footing and balance at all times. 

 Proper footing and balance enables 

better control in unexpected situations.

2.

3.

4.

1.

2.

3.

1.

2.

3.

4.

Содержание 95887














Отзывы: