SKU 95313
For technical questions, please call 1-800-444-3353
Page 7
unpacking
When unpacking, check to make sure the following parts are included.
Chainsaw Sharpener with Grinding Wheel and Chain Mounting Assembly
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual.
assembly and Operation
installing on the workbench:
When installing the sharpener on a workbench, make sure that the Lock Wheel (18) is accessible,
as shown in the mounting picture in
FIGURE 1
.
Bolt the unit directly to the workbench through the two 1/4” holes on the Base (17) (bolts not in-
cluded). The workbench must have a solid surface capable of supporting the weight of this product,
the workpiece and assorted tools. See
FIGURE 2
.
FIGURE 2
1/4” Hole
with Bolt
FIGURE 1
Lock Wheel
(18)
Base (17)
Mounting the grinding wheel:
Raise the Top Housing (4) and lock it in the up
position by tightening the Lock Stop (6) as in figure
3.
See FIGURE 3.
Remove the two screws holding the Grinding
Wheel Cover (11). Set the cover aside.
1.
2.
1.
2.
FIGURE 3
FIGURE 3
