SKU 95313
For technical questions, please call 1-800-444-3353
Page 2
spEciFicatiOns
Construction
Nylon Housing, Steel Mounting
Assembly, Aluminum Oxide
Grinding Wheel
Vise Capacity 0.50” to 0.80” ; 0° - 35° Right to Left
Chain
capacity
.404”, .375”, .325”
Motor
120 V~, 60 Hz, 0.75 A, 4200 RPM
Arbor
7/8” Diameter, 1.25mm thread
pitch
save this Manual
You will need the manual for the safety
warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list
and diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and
dry place for future reference.
saFEty warnings and
prEcautiOns
warning:
When using tool, basic safety precau-
tions should always be followed to reduce
the risk of personal injury and damage to
equipment.
Read all instructions before using
this tool!
KEEp guards in placE and in working
order.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite ac-
cidents.
do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power
tools create sparks which may ignite the dust
or fumes.
Keep bystanders, children, and visi-
tors away while operating a power tool.
Distractions can cause you to lose control.
Protect others in the work area from debris
such as chips and sparks. Provide barriers or
shields as needed. Never allow children to
handle this product.
1.
2.
3.
4.
grounded tools must be plugged into an
outlet properly installed and grounded
in accordance with all codes and
ordinances. never remove the grounding
prong or modify the plug in any way. do
not use any adapter plugs. check with a
qualified electrician if you are in doubt
whether the outlet is properly grounded.
If the tool should electrically malfunction
or break down, grounding provides a low
resistance path to carry electricity away from
the user.
double insulated tools are equipped with
a polarized plug (one blade is wider than
the other). This plug will fit in a polarized
outlet only one way. if the plug does not
fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician to install a polarized outlet. do
not change the plug in any way.
Double
insulation eliminates the need for the three
wire grounded power cord and grounded
power supply system.
avoid body contact with grounded
surfaces such as pipes, radiators, ranges,
and refrigerators.
There is an increased risk
of electric shock if your body is grounded.
do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
do not abuse the power cord.
never use
the power cord to carry the tool or pull
the plug from an outlet. Keep the power
cord away from heat, oil, sharp edges,
or moving parts. replace damaged power
cords immediately.
Damaged Power Cords
increase the risk of electric shock.
when operating a power tool outside, use
an outdoor extension cord marked “w-a”
or “w”.
These extension cords are rated for
outdoor use, and reduce the risk of electric
shock.
personal safety
stay alert. watch what you are doing,
and use common sense when operating a
power tool. do not use a power tool while
tired or under the influence of drugs, alco
-
hol, or medication.
A moment of inatten-
tion while operating power tools may result in
serious personal injury.
5.
6.
7.
8.
9.
10.
1.
rEV 07l
