Page 2
SKU 94782
for technical questions, please call 1-800-444-3353.
spEcificAtions
Electrical Requirements
120 V~
Motor No Load Speed
1000 RPM
Frequency
50-60 Hz
Rated Input Power
525 Watts
Cutter Dimensions
9” L x 12-1/8” W x 3-3/8” H
Cutter Width
1/4”
Cutter Capacity
14 gauge sheet steel/iron plate
Peak Amps
1.87 (no load), 4.4 (rated)
3/4 HP continuous operation in cutting steel plates up to 5/32”
thick and stainless steel up to 5/64” thick. 360 degree direction
during operation.
save this Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
gEnErAl sAfEty rulEs
wArning!
rEAd And undErstAnd All instructions
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVE tHEsE instructions
work ArEA
keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust.
Power tools create sparks which may
ignite the dust or fumes.
keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
1.
2.
3.
