Page 10
SKU 94782
for technical questions, please call 1-800-444-3353.
opErAtion instructions
Make certain that the material to be cut does not exceed the capacity for this Nib-
bler; steel plates up to 5/32” thick and stainless steel up to 5/64” thick.
Create a template of the shape to be cut; or mark the lines to be cut using a straight-
edge.
Grasp the Nibbler firmly with both hands. Press the On/Off Button (53).
Apply light and firm pressure to move the Nibbler through the material. If the Nib-
bler stalls while cutting, turn it OFF. Back it slightly out of the cut and restart the
cutting process.
NOTE: The Nibbler is designed for cutting gradual curves and not 90 degree cor-
ners.
Practice with the Nibbler on a scrap piece of steel plate before using it on the de-
sired workpiece.
When finished cutting, slide the ON/OFF Button to the OFF position to turn off the
tool. Disconnect it from the power source.
inspEction, MAintEnAncE, And clEAning
wArning!
Make sure the Power Switch of the tool is in its “OFF” position and
that the tool is unplugged from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
bEforE EAcH usE,
inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
do not use damaged equipment.
periodically, inspect the condition of the cutting knife (6). if dull or damaged,
the cutting blade should be replaced. follow instructions for replacing the
cutting knife on the previous page.
As necessary, wipe off the Nibbler with a damp cloth. You may use a mild detergent
or non-flammable solvent.
Once clean, lubricate all moving parts with a light oil.
When storing, keep the Nibbler in the case, out of the reach of children.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
