background image

SKU 92156      For technical questions, please call 1-800-444-3353.         Page 2

PRODUCT SPECIFICATIONS

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram.  Keep your invoice with this manual.  Write the invoice number
on the inside of the front cover.  Keep this manual and invoice in a safe and dry
place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow  all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE  INSTRUCTIONS

WORK AREA

1.

Keep your work area clean and well lit.  Cluttered benches and dark areas
invite accidents.

2.

Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.  
Power tools create sparks
which may ignite the dust or fumes.

3.

Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.

Cord Length

30 Feet (16 Ga.)

Maximum Bulb Wattage

13 Watts

Outlet Capacity

5 A/125 VAC

Weight

7.3 Lbs.

Features:  4’ Pigtail with overload protection, 13 Watt
Fluorescent Bulb, 3- Prong Socket in Handle,

GENERAL USE CORD REEL ONLY

FOR USE IN INDOOR DRY LOCATIONS ONLY

E223040

Содержание 92156














Отзывы: