SKU 91935
For technical questions, please call 1-800-444-3353
Page 15
BAFFLE PLATE
(20)
HOLDER
(21)
BAFFLE PLATE
(20)
HOLDER
(21)
HOLDER
(21)
THUMB
SCREW
(18)
THUMB
SCREW
(18)
CLAMP ASSY.
(66, 67, 69, 70)
CLAMP ASSY.
(66, 67, 69, 70)
FIGURE L
To Assemble Additional Accessories:
1.
A workpiece Clamp Assembly (66, 67, 69, 70) can be installed by inserting the
Assembly into the hole located in the Guide Fence (74). Once inserted, lock
the Assembly in place with the Thumb Screw (18). To clamp the workpiece to the
Base (16) of the Miter Saw, turn the Adjusting Knob (66) clockwise.
(See Figure L.)
2.
A workpiece Holder (21) can be inserted into each side of the Base (16), adjusted
for the desired length, and locked in place with a Thumb Screw (18). The Holders
should be used as supports when cutting longer length workpieces.
(See Figure L.)
3.
The Baffle Plate (20) can be attached to the workpiece Holder (21) and locked
in place with a Thumb Screw (18). Once attached and locked in place, the Baffle
Plate allows you to make repeated cuts of the same length. To do so, loosen the
Thumb Screw (18) that holds the Holder (21) in place. Measure the distance
from the Saw Blade (95) to the Baffle Plate and, when the desired length of cut is
determined, lock the Holder in place with the Thumb Screw.
(See Figure L.)
