background image

Page 2

For technical questions, please call 1-800-444-3353.

SKU 68010 

        

Save THiS manual

Keep this manual for the safety 

warnings and precautions, assembly, 

operating, inspection, maintenance and 

cleaning procedures.  Write the product’s 

serial number in the back of the manual 

near the assembly diagram (or month 

and year of purchase if product has no 

number).  Keep this manual and the 

receipt in a safe and dry place for future 

reference.

impoRTanT SaFeTY 

inFoRmaTion

in this manual, on the labeling, 

and all other information 

provided with this product:

  This is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

dangeR indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

waRning 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

cauTion, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.
 

noTice is used to 

address practices 

not related to personal injury.
 

cauTion, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

 waRning! Read all instructions.  

Failure to follow all instructions 

listed below may result in fire, 

serious injury and/or deaTH. 

The warnings and precautions 

discussed in this manual cannot 

cover all possible conditions and 

situations that may occur.  It must 

be understood by the operator that 

common sense and caution are 

factors which cannot be built into 

this product, but must be supplied 

by the operator.

Save THeSe inSTRucTionS

waRningS and 

pRecauTionS

Wear ANSI-approved safety goggles, 

1. 

heavy-duty work gloves, and dust 

mask/respirator during set up.

Keep clear of vanes and impellers 

2. 

while motor is running.

Make sure the Power Cord trails 

3. 

BEHIND the Snow Thrower during 

use.  Do not let the Power Cord curl 

in front of Snow Thrower.
If using extension cord, use only 

4. 

outdoor-specific cable.

Содержание 68010















Отзывы: