Page 8
For technical questions, please call 1-800-444-3353.
SKU 68010
aSSemBlY
Use the Knobs (3) and Screws (2) to
1.
fasten the Upper Handle (1) to the
Middle Handle (4).
Use the Knobs and Screws to fasten
2.
the Middle Handle to the Lower
Handle (5).
Thread the bottom of the Rocker
3.
Shaft (58) into the top of the Hood
(54).
Use the Cotter Pins (61) to fasten the
4.
Direction Lever (63) to the top of the
Rocker Shaft.
Align the mounting holes on the
5.
Direction Lever with the mounting
holes of the Middle Handle. Fasten
together using the Screws (66) and
Nuts (67).
opeRaTing inSTRucTionS
Read the enTiRe impoRTanT
SaFeTY inFoRmaTion
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
waRning:
Do not use the Snow Thrower
on rocky or gravel surfaces. Such
materials can be drawn up into the
machine, damage the machine and/
or cause injury to bystanders or
property damage when ejected.
Set up
The Snow Thrower is equipped with
1.
a Safety Switch (77). To activate
Switch, insert one finger into Switch’s
opening and pull the Switch out (or
away from you), grasping it along
with the Upper Handle.
Push the Switch back to activate the
2.
Snow Thrower and hold it against the
Upper Handle to keep Snow Thrower
activated.
To turn off Snow Thrower, release the
3.
Power Switch.
waRning!
4.
Do not attempt to
override or modify Power Switch.
noTe:
5.
The Snow Thrower has an
Overload Protector (74) in the Switch
Box (75) that protects the main circuit
from short circuit overloads.
If there is a short circuit, the Overload
6.
Protector switch will pop out.
To reset:
Release the Power Switch and let
a.
the Snow Thrower stop and cool for
a few minutes.
After cool-down period, press
b.
the Overload Protector Switch to
reset Snow Thrower and continue
operation.
If the Overload Protector Switch pops
7.
out again:
Let Snow Thrower cool down for 15-
a.
30 minutes.
After cool-down period, press the
b.
Power Switch to reset and continue
operation.
noTe:
8.
Should the Safety Switch
regularly pop out, stop using the
Snow Thrower until it is inspected
and serviced by a qualified
technician.