Page 9
For technical questions, please call 1-800-444-3353.
Item 67537
SAFET
y
O
PERA
TION
M
AINTENAN
c
E
SETUP
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
General Operating Instructions
1. Make sure that the Power Switch is in
the off-position, then plug in the tool.
2. Hold the Tool with both hands and slide
the Power Switch forward to activate.
3. Adjust the speed of the tool using the Speed
Control Dial. There are six speed settings from
1 (slowest) to 6 (fastest). Determine the optimum
speed by testing on a scrap piece of material.
4. Do not allow contact between Sandpaper,
Scraper, or Blade and workpiece until the
tool is running at the intended speed.
5. Avoid contact with foreign objects such as metal
screws and nails when sanding, scraping, or cutting.
6. Do not apply excessive pressure on the Tool.
Allow the Tool to do the work.
7. When finished, slide the Power Switch to OFF. Allow
the tool to stop completely before setting it down.
8. To prevent accidents, turn off the tool and
unplug it after use. Clean, then store the
tool indoors out of children’s reach.
Содержание 67537
Страница 1: ......
