SKU 66118
For technical questions, please call 1-800-444-3353.
Page 7
To remove screws, press the bot-
3.
tom (Reverse) Direction Button. The
Screwdriver will continue to function
until you take your finger off button.
When either Direction Button is
4.
pressed, the LED Light (32) will
activate. Like the tool itself, the LED
Light will deactivate once your finger
is taken off the Direction Button.
When finished with tool, remove
5.
drill bit from Chuck. Store Cordless
Screwdriver and bit set in dry, secure
location out of children’s reach.
maIntEnanCE anD
SERVICIng
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO pREVEnt
SERIOuS InjuRY
FROm aCCIDEntaL
OpERatIOn: Remove the
Batteries before performing
any inspection, maintenance,
or cleaning procedures.
tO pREVEnt SERIOuS
InjuRY FROm tOOL
FaILuRE: Do not use
damaged equipment. If
abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, maintenance, and
Lubrication
BEFORE EaCH uSE,
1.
inspect the
general condition of Cordless Screw-
driver. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, and any
other condition that may affect its
safe operation.
aFtER uSE,
2.
wipe surfaces of the
tool with clean cloth.
Properly recycle all used batteries. If
3.
Cordless Screwdriver will not be used
for an extended period, remove bat-
teries.
4.
WaRnIng! tool service and
repairs must be performed only by
a qualified service technician.
pLEaSE REaD tHE FOLLOWIng CaREFuLLY
THE MANufACTuRER AND/oR DisTRiBuToR HAs PRoviDED THE PARTs LisT AND AssEMBLy DiAgRAM iN
THis MANuAL As A REfERENCE TooL oNLy. NEiTHER THE MANufACTuRER oR DisTRiBuToR MAkEs ANy
REPREsENTATioN oR WARRANTy of ANy kiND To THE BuyER THAT HE oR sHE is quALifiED To MAkE ANy REPAiRs
To THE PRoDuCT, oR THAT HE oR sHE is quALifiED To REPLACE ANy PARTs of THE PRoDuCT. iN fACT, THE
MANufACTuRER AND/oR DisTRiBuToR ExPREssLy sTATEs THAT ALL REPAiRs AND PARTs REPLACEMENTs sHouLD
BE uNDERTAkEN By CERTifiED AND LiCENsED TECHNiCiANs, AND NoT By THE BuyER. THE BuyER AssuMEs ALL
Risk AND LiABiLiTy ARisiNg ouT of His oR HER REPAiRs To THE oRigiNAL PRoDuCT oR REPLACEMENT PARTs
THERETo, oR ARisiNg ouT of His oR HER iNsTALLATioN of REPLACEMENT PARTs THERETo.
tROuBLESHOOtIng
problem
possible Cause
probable Solution
Cordless Screwdriver does not operate
when Direction Button is pressed.
Battery power is low.
Replace Batteries.
Cordless Screwdriver unable to remove
screw.
Not enough torque.
1.
Wrong size bit.
2.
Use a tool with greater torque.
1.
Use correct size bit.
2.
