Page 15
For technical questions, please call 1-888-866-5797.
Item 65818
S
AFET
y
W
EL
d
IN
g
C
UTTIN
g
M
AINTENANCE
S
ETU
p
Cutting Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Inspect tool before use, looking for leaking, damaged, loose, and missing parts.
If any problems are found, do not use tool until repaired.
1. Set up for cutting according to
instructions on pages 6-9.
2. Close all valves on the Torch Handle
and Cutting Attachment securely.
pre-heat
Oxygen Valve
Acetylene (gAS)
Torch Valve
Oxygen (OXy)
Torch Valve
Cutting Step 2: Close Valves
3. Adjust the Acetylene and Oxygen Regulators
to their proper working pressures, see
Table B on page 14.
dO NOT EXCEEd 15 pSI
ACETyLENE pRESSURE.
Cutting Step 3: Set Cutting pressures
See Table B on page 14.
Acetylene
Regulator
(10)
Acetylene delivery pressure
dO NOT EXCEEd 15 pSI.
Oxygen delivery
pressure
Oxygen
Regulator
(9)
4. Hold the Torch Handle in one hand
and the striker in the other hand.
