background image

SKU 65796 

For technical questions, please call 1-800-444-3353. 

Page 2

SAVE THIS mANuAL

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

ImPORTANT SAFETy 

INSTRuCTIONS

In this manual, on the labeling, 

and all other information 

provided with this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

DANgER indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

WARNINg 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CAuTION, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

NOTICE is used to 

address practices 

not related to personal injury.
 

CAuTION, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.
 

When using power 

tools, basic safety 

precautions should always be 

followed to reduce the risk of 

fire, electric shock, and 

personal injury, including the 

following: 

READ ALL INSTRuCTIONS

Battery Precautions

Do not charge tool in rain or in wet 

1. 

locations.
Do not charger Battery (22) in tem-

2. 

perature below 40°F or above 105°F. 
Do not use battery-operated tool in 

3. 

rain or allow any liquid to get inside 

Charger (32).
Use only the included battery pack or 

4. 

an identical replacement.
Do not dispose of the battery in a 

5. 

fire. The cell may explode. Check 

with local codes for possible special 

disposal instructions.
Do not open or mutilate the battery. 

6. 

Released electrolyte is corrosive and 

may cause damage to the eyes or 

skin. It may be toxic if swallowed.
Exercise care in handling batteries 

7. 

in order not to short the battery with 

conducting materials such as rings, 

Содержание 65796














Отзывы: