Chicago Electric 61608, Руководство пользователя

Страница: 7 / 20

Page 7 For technical questions, please call 1-888-866-5797. Item 61608
13. Check guards for proper operation with saw
disconnected from power before each use. Do
not disable any guard. Do not operate saw
if any movable guard does not move freely
and close instantly. Make sure all parts of
the movable guard do not touch the blade,
regardless of angle, depth of cut, or position.
14. Keep the guard in place while through-sawing.
Verify that the spreader lines up with
the blade to prevent binding.
15. Construct an appropriate Push
Stick out of wood according to the
guidelines on the following page.
16. DO NOT OPERATE WITH ANY GUARD
DISABLED, DAMAGED, OR REMOVED.
Secure the Table in place before operation.
17. The use of accessories or attachments
not recommended by the manufacturer
may result in a risk of injury to persons.
18. When servicing, use only identical
replacement parts.
19. TO PREVENT SERIOUS INJURY
INCLUDING HAND AMPUTATION:
a. Do not operate without table top securely
in place. Do not disassemble table
top while plugged in, or leave saw
unattended without table top in place.
b. Before starting the table saw, check that
the blade, table, and guard align properly
and that the blade will not contact the
table, fence, or guard during operation.
c. Tighten table top firmly into
place before use.
20. Only use safety equipment that has been
approved by an appropriate standards
agency. Unapproved safety equipment
may not provide adequate protection. Eye
protection must be ANSI-approved and
breathing protection must be NIOSH-approved
for the specific hazards in the work area.
21. Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
22. Industrial applications must
follow OSHA guidelines.
23. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
24. Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
25. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
26. WARNING: Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities, contains chemicals
known [to the State of California] to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those dust masks that
are specially designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq. )
27. WARNING: Handling the cord on this product
will expose you to lead, a chemical known
to the State of California to cause cancer,
and birth defects or other reproductive harm.
Wash hands after handling. (California
Health & Safety Code § 25249.5,
et seq.
)
28. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.