Chicago Electric 61608, Руководство пользователя

Страница: 16 / 20

Page 16 For technical questions, please call 1-888-866-5797. Item 61608
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from
its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
a. loose hardware,
b. misalignment or binding of moving parts,
c. cracked or broken parts,
d. damaged electrical wiring, and
e. any other condition that may
affect its safe operation.
2. AFTER USE , wipe external surfaces
of the tool with clean cloth.
a. Switch off and unplug tool.
b. Once Blade stops completely, remove Blade
following instructions on page 13.
c. Remove all debris.
d. With a brush, cloth, or vacuum, remove
sawdust from Table Saw. Allowing
sawdust or other debris to accumulate
can cause a fire, resulting in severe
personal injury or property damage.
e. Replace both Blade and Table securely
after cleaning, see page 11.
3. WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.