background image

PRODUCT SPECIFICATIONS

SKU 54516

PAGE 2

This product requires oil and fuel to be added before starting.

Attempting to start the engine without oil WILL ruin the engine and
void the warranty.

Fill the engine with the following:

.85 qt. of SAE 15W/40 oil
5.25 qt. of unleaded gasoline with no oil added

Before starting the engine, refer to the engine owner’s manual for

additional engine maintenance information.

Caution:  This generator is not intended to power sensitive electronic

equipment without the addition of an appropriate line conditioner
(sold separately).

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, operating,
inspection, maintenance and cleaning procedures, parts list and assembly
diagram.  Keep your invoice with this manual.  Write the invoice number on the
inside of the front cover.  Keep this manual and invoice in a safe and dry place for
future reference.

Item

Description

Electrical

4,700 Watts (continuous)

Requirements

5,200 Watts (peak)
20 AMPs @ 120 Volts Current Output
20 AMPs @ 240 Volts Current Output
60 Hz Output
Two 20 AMP Circuit Breakers
Two Pole, Single Phase Alternator
120 VAC, Dual outlet, 3-Prong, Ground Receptacle
240 VAC, 4-Prong, Twist Lock Receptacle

Estimated

5.0 Hours (On Full Tank Capacity, Under 50% Load)

Run Time

Engine

Brand: Kubota

®

Model: ZX-340
Power: 11 HP
Start Type: Electric
Unleaded Gasoline Powered
Speed: 3,600 RPM
Displacement: 339.9 CC
Low Oil Shut-Off Feature
Certified to Meet EPA Emissions Standards

Weight

167.20 Pounds

Содержание 54516




















Отзывы: