background image

2.

Do not overreach.  Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.

3.

Industrial applications must follow OSHA requirements.

4.

Stay alert. Watch what you are doing at all times.  Use common sense.  Do not
use this product when you are tired or distracted from the job at hand.

5.

Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function.  Check for damaged parts and
any other conditions that may affect the operation of this product.  Replace or
repair damaged or worn parts immediately.

6.

Replacement parts and accessories: When servicing, use only identical re-
placement parts.  Only use accessories intended for use with this product.  Ap-
proved accessories are available from Harbor Freight Tools.

7.

Maintain this product with care. Keep this product clean and dry for better and
safer performance.  For your safety, service and maintenance should be per-
formed regularly by a qualified technician.

8

.

Use the right generator for the job. Do not attempt to force a small generator or
attachment to do the work of a larger industrial generator.  There are certain
applications for which this generator was designed.  It will do the job better and
more safely at the rate for which it was intended.  Do not modify this generator,
and do not use this generator for a purpose for which it was not intended.

9.

       WARNING!  The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur.  The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.

1.

Do not use this product if under the influence of alcohol or drugs.  Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs.  If there is any doubt, do not attempt to use this
product.

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

SKU 54516

PAGE 6

SERVICE

23.

Generator service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.

24.

When servicing a generator, use only identical replacement parts.  Follow
instructions in the 

“Inspection, Maintenance, And Cleaning” section of this

manual.  Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.

Содержание 54516




















Отзывы: