Chicago Electric 36595, Руководство по сборке и эксплуатации

Страница: 7 / 11

OPERATION CAUTIONS
Before every use, follow these special safety instructions in addition to those under
SAFETY WARNINGS & CAUTIONS.
¨ Check the Saw Blade to make sure it does not have any missing teeth or cracks. Do not
use a damaged Saw Blade.
¨ Check that there is enough space under and behind the workpiece for the reciprocating
Blade. Be sure that you will not be cutting through any electrical wires or your workbench.
¨ Do not put side-to-side pressure on the Blade. This will break the Blade.
¨ Never attempt to remove material stuck in the moving parts of the Saw while the Saw is ON
or plugged in.
¨ Never cut wood that is thicker than the length of the Blade.
¨ Do not attempt to cut curves with your Saw. This will break the Blade.
OPERATION
Step 1: Before plugging the Saw into an outlet, check to make sure the TRIGGER SWITCH
(#37) is not locked in the “ON” position. Press and release the TRIGGER SWITCH once
to make sure the switch is unlocked and “OFF.”
Step 2: Plug the Saw into an outlet. See VOLTAGE WARNING on page 4.
Step 3: Grip the Saw with both hands. Do not block the ventilation slots of the motor.
Step 4: Press the TRIGGER SWITCH to start the Saw. Do not start the Saw if the Blade is in
contact with anything before operation. Lift the Saw up to free the Blade before pressing
the TRIGGER SWITCH.
Step 5: Your Saw is equipped with a lockable TRIGGER SWITCH. To operate the tool for ex
tended periods of time, press and hold the TRIGGER SWITCH, then press the Locking
Button as shown in Figure 4.
Trigger Switch
(#37)
Locking Button
Page 7 -- SKU: 36595
CAUTION
When Cutting Metal, Use Cutting
Oil to Cool the Blade or Damage
May Result.