Chicago Electric 36595, Руководство по сборке и эксплуатации

Страница: 5 / 11

UNPACKING
When unpacking your Reciprocating Saw, check to make sure the following parts are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover
of this manual.
ASSEMBLY
Your Reciprocating Saw comes partially assembled. To complete assembly, follow the steps
below. Make sure the Saw is not plugged in.
Blade Assembly
Step 1: Select the Saw Blade best suited for your application. Wood Blades have a coarser tooth
pitch, Metal Blades have a finer tooth pitch. Use each Blade only for its specified
material.
Step 2: With the supplied Hex Key Wrench, loosen but do not remove SCREW (#4) as shown in
Figure 1.
Figure 1 — Blade Assembly
Step 3: Slide selected Blade, teeth down, into the BLADE HOLDER as far as possible.
Step 4: Tighten the SCREW (#4) firmly.
Screw
(#4)
Page 5 -- SKU: 36595
ITEM# DESCRIPTION QTY
N/A Reciprocating Saw 1
N/A Wood Blade 1
N/A Metal Blade 1
N/A Hex Key Wrench 2