Chicago Electric 32222, Руководство по сборке и эксплуатации

Страница: 5 / 13

EXTENSION CORDS
Your tool has a three prong plug, therefore you must use a three- prong extension cord. Only use
rounded jacket extension cords listed by the Underwriters Laboratories (UL). If you are using the
tool outdoors, you must use an extension cord rated for outdoor use. This is signified by the letters
“WA” on the jacket.
The extension cord must have a minimum wire size depending on the amperage of the tool and
the length of the extension cord. This size is signified by its AWG (American Wire Gauge) rating.
The smaller the gauge, the greater the cable’s capacity. It does not matter if you are using one
cord, or two or more- the total length is what is used to determine the minimum AWG rating. Every
cord used must meet the AWG rating. Use the chart below to determine what AWG rating is
required for your situation. Cord length is rated in feet.
AMP TOTAL EXTENSION CORD(S) LENGTH IN FEET
RATING 25 50 75 100 125 150 175 200
0-10.0 18 18 16 16 14 14 12 12 A
10.1-13.0 16 16 14 14 14 12 12 12 W
13.1-15 14 14 12 12 12 12 12 __ G
15-18 14 12 12 12 12 12 __ __
Always inspect extension cords for any damage. If there are any loose, frayed, or exposed
wires; damaged insulation; or defective connections, the cord must not be used. Harbor Freight
Tools can supply UL listed and outdoor rated cords in multiple AWG rating if needed.
UNPACKING
When unpacking, check to make sure the following parts are included. All sizes listed below are
approximate. If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
ITEM # DESCRIPTION
ITEM # DESCRIPTION
56 Replacement Belt
58 One Set Replacement Brushes
62 Blade Set Jig
63 Blade Sharpening Jig
65 Guide Fence
66 5mm T-Handle Box Wrench
Page 5 -- SKU: 32222
REV 03/00