REAR PANEL
1.POWER SWITCH AND VOLUME CONTROL
Turn the knob clockwise until it clicks to switch on the power. Further turning will incre-
ase the volume.
2.POWER ON INDICATOR
When power is switched on
the power on LED will light up.
3.RF SIGNAL INDICATOR
Indicates RF signal received. As soon as signal is emitted from the microphone
the
LED of the indicator will light up.
4.AF SIGNAL INDICATOR
Indicates the audio signal. When sound is applied to microphone
LED will light up.
5.ANTENNA INPUT JACK
For direct mounting of antenna or antenna extension cable.
6.UNBALANCED AUDIO OUTPUT JACK
7.DC POWER SUPPLY INPUT SOCKET
A 12-15V external DC power supply or an AC adapter could be connected to this socket
while the negative is grounded.
CONTROLS AND FUNCTIONS
R-1000 / R-2000 is a VHF high-band non-diversity system with quartz controlled
fixedfrequency design. The receiver must be combined with Chiayo's Q- and M-
series of wireless microphone.
1. MATCHING WIRELESS MICROPHONE:Q- and M- series such as Q-1000 &
M-1000
1. MAIN FRAME:R-1000 / R-2000
2. ACCESSORIES:1)AC adapter 2)antenna X 1(R-1000) /antenna X 2(R-2000)
3)Output cable / PHONE 4)Operating manual
OUTLINE
FRONT PANEL
GENERAL
CONTROLS AND FUNCTIONS
SYSTEM COMBINATION
COMPOSITION
2.
To access the battery ,pull out the battery cover as in Fig.2.
Belt-Pack Transmitter(M-1000)
3.
Insert a 9V battery with correct polarity into the battery compartment and put back
the compartment cover, as show in Fig.3.4.
6
1.
The Belt-Pack transmitter is shown in Fig.1.
Fig.1
Fig.2
Fig.3
Fig.4
1
