RCA RS2664 Скачать руководство пользователя страница 1

Страница: 1 / 1

Important information

FCC information

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
In accordance with FCC requirements, changes or
modifications not expressly approved by
Thomson Inc. could void the user’s authority to
operate this product.
This device generates and uses radio frequency
(RF) energy, and if not installed and used
properly, this equipment may cause interference
to radio and television reception.
If this equipment does cause interference to
radio or television reception (which you can
determine by turning the equipment off and
on), try to correct the interference by one or
more of the following measures:
•

Reorient the receiving antenna (that is, the
antenna for the radio or television that is
"receiving" the interference).

•

Move the unit away from the equipment
that is receiving interference.

•

Plug the unit into a different wall outlet so
that the unit and the equipment receiving
interference are on different branch circuits.

If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions.
Also, the Federal Communications Commission
has prepared a helpful booklet, "How To
Identify and Resolve Radio TV Interference
Problems." This booklet is available from the
U.S. Government Printing Office, Washington,
DC 20402. Please specify stock number 004-000-
00345-4 when ordering copies.
This product complies with DHHS Rules 21 CFR
Subchapter J. Applicable at the date of
manufacture.

For your safety

The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC power
outlets one way. If the plug won’t
go into the outlet completely, turn
the plug over and try to insert it
the other way. If it still won’t fit, contact a
qualified electrician to change the outlet, or use
a different one.

Do not attempt to bypass

this safety feature.

CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.

WARNING:

TO PREVENT FIRE OR ELECTRICAL

SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

THE EXCLAMATION
POINT WITHIN THE
T R I A N G L E   I S   A
WARNING   SIGN
ALERTING YOU    OF
I M P O R T A N T
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E   P R O D U C T.

T H E   L I G H T N I N G
FLASH AND ARROW-
HEAD WITHIN THE
T R I A N G L E   I S   A
W A R N I N G   S I G N
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT.

CAUTION: TO  REDUCE  THE
RISK OF ELECTRIC SHOCK,
D O   N O T   R E M O V E  C O V E R
( O R   B A C K ) .   N O   U S E R -
S E RV I C E A B L E   PA R T S   I N -
S I D E .   R E F E R   S E RV I C I N G
T O   Q U A L I F I E D   S E R V I C E
PERSONNEL.

GEFAHR EINES

ELEKTRISCHEN SCHLAGS

Getting started

English

RS2664

user

manual

manual de usuario

Tocom: 5645 6830

Display

Clock/Timer/Sleep timer

Sound control

Disc and USB playback

Intro/Repeat/Random playback

Disc and USB playback

EN/E

It is important to read this instruction prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.

LTI F

UNCTION DISPL

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

Some of the following information may not
apply to your particular product; however, as
with any electronic product, precautions should
be observed during handling and use.
•

Read these instructions.

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water.

•

Clean only with dry cloth.

•

Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.

•

Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.

•

Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. If the provided
plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.

•

Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

•

Only use attachments/accessories specified
by the manufacturer.

•

Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a
cart is used, use caution
when moving the cart/
apparatus combination to avoid injury from
tip-over.

•

Unplug this apparatus during lightning
storms or when unused for long periods of
time.

•

Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

•

ADDITIONAL SAFETY INFORMATION

•

Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on the
apparatus.

•

Always leave sufficient space around the
product for ventilation. Do not place
product in or on a bed, rug, in a bookcase
or cabinet that may prevent air flow
through vent openings.

•

Do not place lighted candles, cigarettes,
cigars, etc. on the product.

•

Connect power cord only to AC power
source as marked on the product.

•

Care should be taken so that objects do not
fall into the product.

•

Do not attempt to disassemble the cabinet.
This product does not contain customer
serviceable components.

•

IF YOUR PRODUCT OPERATES ON
BATTERIES, adhere to the following
precautions:

A. Any battery may leak electrolyte if mixed
with a different battery type, if inserted\
incorrectly, or if all batteries are not
replaced at the same time.
B. Any battery may leak electrolyte or
explode if disposed of in fire or an attempt
is made to charge a battery not intended to
be recharged.
C. Discard leaky batteries immediately.
Leaking batteries can cause skin burns or
other personal injury. When discarding
batteries, be sure to dispose of them in the
proper manner, according to your state/
provincial and local regulations.

Technical information

Product: Audio System
Brand: RCA
Model: RS2664

Electrical consumption

Power Supply: 120V ~ 60Hz
Power Consumption: 240 Watts

For your records

In the event that service should be required, you
may need the model number. In the space
below, record the date and place of purchase:
Model No.
Date of Purchase
Place of Purchase

Service information

This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.

Safety precautions

•

Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.

•

Never operate this product with the cabinet
removed.

•

Do not use your System immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction.

•

Keep your unit away from humid areas and
abnormally hot places.

•

Do not touch the player with wet hands. If
any liquid enters the player cabinet, take
the player to a trained technician for
inspection.

•

This compact disc player uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is
completely safe when operated according to
directions.

•

Discs rotate at high speed inside the player.
Do not use damaged, warped, or cracked
discs.

•

Do not touch the pick-up lens which is
located inside the disc compartment. To
keep dust from collecting on the pick-up
lens, do not leave the compartment door
open for an extended period of time. If the
lens becomes dirty, clean it with a soft
brush, or use an air blower brush designed
for camera lenses.

•

The apparatus shall not be exposed to
dripping and splashing and that no objects
filled with liquids, such as vases, shall be
placed on apparatus.

•

Main plug is used as the disconnet device, it
shall remain operable and should not be
obstructed during intended use. To be
completely disconnected the apparatus from
supply mains, the main plug of the
apparatus shall be disconnected from the
mains socket outlet completely.

Important battery

information

•

Remove the batteries to avoid leakage if
you do not use your remote control for-
more than one month.

•

Discard leaky batteries immediately as
leaking batteries may cause skin burns or
other personal injuries. Dispose of batteries
in the proper manner, according to
provincial and local regulations.

•

Any battery may leak electrolyte under the
following circumstances:

if mixed with a different battery type,

if inserted incorrectly,

if all batteries are not replaced at the
same time,

if disposed of in fire, or

if an attempt is made to charge a battery
not intended to be recharged.

Headset safety

•

Have a Blast-Just Not in your
eardrums!
Make sure you turn down the
volume on the unit before you
put on headphones. Increase
the volume to the desired level only
after headphone are in place.

•

Do not play your headset at high volume.
Hearing experts warn against extended
high-volume play.

•

If you experience ringing in your ears,
reduce volume or discontinue use.

•

You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air
designed to let you to hear outside sounds,
do not turn up the volume so high that
you are unable to hear what is around you.

Important information

Don’t infringe

This product should only be used for the
purposes for which it is sold, that is,
entertainment, violating no copyright law. Any
attempts to use this product for which it is not
intended is unlawful and therefore not
condoned by Thomson.

Portions based upon Microsoft Windows Media
Technologies. Copyright © 1999 Microsoft
Corporation. All Rights Reserved. Microsoft,
Windows Media, and the Windows Logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.

The descriptions and characteristics given in this
document are given as a general indication and
not as a guarantee. In order to provide the
highest quality product possible, we reserve the
right to make any improvement or modification
without prior notice. The English version serves
as the final reference on all products and
operational details should any discrepancies
arise in other languages.

Unpacking the system

You should have the following:
•

one main unit (with 2 main speakers)

•

one remote control

•

one AM loop antenna

•

one user manual

•

owner registration card

Back view

1. Main speaker jacks (high pass)
2. Woofer jacks (low pass)
3. AM loop antenna jack
4. FM pigtail antenna

Using FM and AM antennas

Before you use your audio system, you’ll want to
make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at
the back of the unit, making sure it is fully
extended (you may even want to tape it to the
wall behind the unit if possible, the higher the
better). You’ll also need to connect the AM
antenna loop to the back of the unit if you
listen to AM stations. Rotate the AM loop
antenna for better reception.

Connecting main speakers

Each speaker has a black/red wire and a black/
purple wire. When connecting the speakers,
match the red/purple wires to the red/purple
jacks and the black wires to the black jacks on
the main unit.

Release tab to lock wire in
the terminal.

NOTE:

Make sure the insulation is completely removed from the
ends of the speaker wires at all connection points.

Speaker Wire Connection

Push Speaker terminal tab
down to insert wire.

Front view

Side view

4”

2”

Main unit

General controls

ON/STANDBY

– to turn on or off (standby

mode) the unit. Remember to unplug the power
cord from the power outlet if you are not going
to use the system for some time.

SOURCE

– to select among the CD player, Tuner,

AUX and USB modes.

CD REC

– to start and stop recording from CD to

the USB device.

USB jack – to connect the USB device.
Mass Storage Class (MSC) devices are supported.

LTI F

UNCTION DISPL

BAND/INFO

–

in CD mode, to select among the playback
information.

–

in USB mode, to show the memory usage.

–

in mp3/wma disc mode, to show the track
play time and ID3 tags information (e.g.
song title, artist, album) during playback.

–

in tuner mode, to use as BAND key to
change among the tuner bands. To enter
the auto preset programming in the FM
mode when pressed for 2 seconds.

BASS BOOST

– to turn on or off the Bass Boost.

DEMO/DIMMER

– to activate or deactivate the

display demostration. Press and hold to adjust
the display brightness.

– to open or close the disc tray.

– to select the equalizer presets.

PROG/SET

–

to enter the program mode for CD, USB
and tuner.

–

in USB mode, to enter the file rename
operation.

VOLUME

– to adjust the volume.

DISC 1/2/3/4/5

– to enter the CD mode and play

the corresponding CD.

– in CD, USB or mp3/wma disc mode, to

start and pause the playback.

–

in CD, USB or mp3/wma disc mode, to stop
the playback.

–

in mp3/wma disc mode, to return to the
first track of the current disc; to display the
total number of folders and total number
of tracks on the current disc when playback
is completely stopped.

–

in recording mode, to stop recording to the
USB device.

–

in CD, USB or mp3/wma disc mode, to go to
the previous or next track; press and hold
to search backward or forward within a
track.

–

in tuner mode, to tune down or up the
radio frequency.

General controls

PREV/NEXT

–

in USB or mp3/wma disc mode, to go to the
previous or next folder.

–

in tuner mode, to select the previous or
next preset station.

Phone and AUX IN

Open the compartment door at the bottom of
the main unit to reveal the jacks inside.

PHONE

- Jack for connecting headphones.

AUX IN

- Jacks for external sound input.

General controls

SOURCE

– to select among the CD player,

Tuner, AUX and USB modes.

– to mute the audio output.

DEL

–

when reviewing the program, to remove
track / file from the program list.

–

in USB mode, to remove file from the
connected USB device.

–

in USB mode, to delete the current alphabet
during file rename.

ADD

– in CD, USB or mp3/wma disc mode, to

add tracks to the program list.

– to turn the power on or off (STANDBY
mode).

– to select the equalizer presets.

B.BOOST

– to turn on or off the Bass Boost.

DISC SKIP

– to skip to the next disc in CD mode.

–

in CD, USB or mp3/wma disc mode, to go to
the previous or next track; press and hold to
search backward or forward within a track.

–

in tuner mode, to tune down or up the
radio frequency.

– in CD, USB or mp3/wma disc mode, to

start and pause the playback.

VOL +/–

– to increase or decrease the volume

level.

Remote control

SOURCE

FOLDER
/PRESET

DEL

ADD

E Q

B.BOOS

VOL

REV

BAND/REPEAT

DISC S

KIP

CLOCK

SLEEP

CD REC

PROG/SET

STOP

TIMER

FM ST./INTRO

General controls

PROG/SET

–

to enter the program mode for CD, USB
and tuner.

–

in USB mode, to enter the file rename
operation.

STOP

–

in CD, USB or mp3/wma disc mode, to stop
the playback.

–

in USB or mp3/wma disc mode, to return to
the first track of the current disc in stop
mode; to display the total number of tracks
on the current disc when playback is
completely stopped.

–

in recording mode, to stop recording to the
USB device.

BAND/REPEAT

–

in tuner mode, to change between the FM
and AM radio bands; to enter the auto
preset programming in FM mode when
pressed for 2 seconds.

–

in CD mode, to repeat a track, a CD or all
CDs.

–

in USB or mp3/wma disc mode, to select the
repeat one file or repeat all files mode.

FM ST/INTRO

–

to select between the stereo and mono
sound in the FM tuner mode.

–

to turn the intro mode on or off to play
the first 10 seconds of each track in CD, USB
or mp3/wma disc mode.

– to turn on or off random listening in CD,
USB or mp3/wma disc mode.

CLOCK

– to enter the clock setting mode; to

show the clock time.

TIMER

– to enter the timer setting mode; to turn

on or off the timer.

SLEEP

– to select the time interval in minutes

before the unit turns off automatically.

FOLDER/PRESET

–

in USB or mp3/wma disc mode, to select the
previous or next folder.

–

in tuner mode, to select the previous or
next preset stations.

CD REC

– to start and stop recording to the USB

device.

The remote control must be
inserted with 2 “AAA” or “UM-4”
or “R03” batteries prior to use.

REC PROG

SLEEP

REPEAT

1ALL

DISCS

INTRO

BASS

– bass boost activated

SLEEP

– sleep mode activated

REC

– recording in progress

PROG

– program playback

mode activated

Source indication

CD tray status:
Lights when loaded
Flashes for the current disc
Animates when playing

Radio
bands

File
format

Timer

activated

Folder
navigation
mode

FM stereo mode activated

Playback
mode
status

Adjusting display brightness

Press and hold

DEMO/DIMMER

to adjust the

display brightness.

Showing demonstration

Press

DEMO/DIMMER

to turn on or off the

demonstration mode. The demonstration scrolls
through all display operations.

Setting the clock

1. Press and hold

CLOCK

on remote control

until the hour flashes on the display.

2. Press

to set the hour and then

press

CLOCK

to shift to the minute digits.

3. Press

to set the minute.

4. Press

CLOCK

to save the setting or

quit setting without saving.

When the unit is turned on, you
can press

CLOCK

to display the

current time for about 4 seconds.

Setting the timer

1. Press and hold

TIMER

on the remote

control until “ON” and the clock hour
flashes on the display (ON - timer on time ).

2. To set the timer on time, press

set the hour and then press

TIMER

to shift

to minute digits.

3. Press

to set the minute.

4. Press

TIMER

to change to OFF (timer off

time) with clock time flashing. Repeat steps
2 & 3 for the timer off time setting.

5. Press

TIMER

to select source. Press

to select among TUNER, DISC or USB.

6. Press

TIMER

to set the volume. Adjust

VOLUME

on the main unit or press

VOL +/–

on the remote control to

select the desired volume level.

7. Press

TIMER

on the remote control to save

and quit the settings. The timer is
automatically activated once timer setting is
saved.

Activating the timer

Press and release

TIMER

to turn on or off the

timer. The timer icon is displayed when the timer
is activated.

Sleep mode

You can select the time interval in minutes
before the unit turns off automatically.
Press

SLEEP

to select among OFF, 120, 90, 60, 45,

30, 15 and 5 minutes. The SLEEP icon lights on
the display when sleep mode is activated.

View remaining sleep time

When sleep mode is activated, press

SLEEP

once

to view the remaining sleep time.

Adjust sleep time

Press

SLEEP

again when the remaining sleep

time is displayed to change the sleep time.
Sleep mode is automatically de-activated when
the unit is turned off.

Volume control

Adjust

VOLUME

on the main unit or press

VOL +/–

on the remote control to adjust the

volume level. The volume level shows briefly on
the display to show the change in the volume
level.

Muting audio

Press on the remote control to cut the
sound. Press again to restore the sound.

Bass boost

Press

BASS BOOST

to turn boosting the bass

frequency on or off . The “Bass” icon lights on
the display when it is activated.

Using preset equalizer curves

Press

on the remote control to select among

FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM.
The display shows your selection briefly.

Creating a Custom Curve

1. Press

on the remote control to select

the CUSTOM mode.

2. While CUSTOM is displayed, press

to cycle among the displayed bass- and
treble-range levels.

3. While BAS or TRE is displayed, adjust the

volume to set the associated gain between -
10 - +10.

4. Press

to exit.

Important CD and mp3/wma

information

This unit is compatible with CD-RW/
CD-R discs for playback.

CD-R / RW

Notes on CD-R/RW Disc:
• Do not affix any type of labels
to either side (recordable or

labeled side) of a CD-R/ RW disc as this
may result in malfunction.

•

To avoid damages to the CD-R/RW
disc, do not open the disc
compartment door while the disc is
being read.

•

Do not load an unrecorded CD-R/RW
disc into the unit. It may take a longer
time to read the disc.

•

Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.

Notes on mp3/wma Disc:
•

Use .mp3 as the extension

when converting audio files
into mp3 for saving onto CD-R/

RW, e.g. Abc08.mp3. Do not use any
other extension e.g. .doc, .pdf.

•

Do not use the .mp3 extension for
other text or non-audio data files as
this may result in serious malfunction
and harmful noise interference.

•

For better quality in mp3/wma disc
playback, the CD quality should be
recorded 128kbps or above.

•

Disc data size > 650MB is not
recommended.

•

Total files and folders in the disc
should not exceed 512, it also
depends on the length of the file/
folder names.

•

For mixed mode discs, only one
mode will be selected for playback
depending on the recording format.

•

To ensure good performance, wait
until the disc changer completely
reads the disc before proceeding.

•

mp3 files in CD ROM EXTRA format
disc cannot be recognized.

Discs playback

1. Press

SOURCE

repeatedly to select the CD

mode.

2. Press to open the disc compartment.
3. Insert up to 5 discs with the label facing up.
4. Press again to close the disc

compartment.

•

The occupied disc tray icons light up on the
display and the current disc icon flashes.

•

If the disc is a mp3/wma CD, the respective
mp3 and wma icon lights on the display.

5. Press

when the disc is stopped to

begin playback. Press

during playback

to pause the disc. Press again to resume the
playback.

6. During playback, press

to stop the

playback.

Play and load simultaneously

1. Press to open the disc tray while a CD is

playing.

2. Load/change discs for available trays.
3. Press again to close the tray.

Selecting discs

Press

DISC 1 / DISC 2 / DISC 3 / DISC 4

DISC 5

on the main unit to select a disc.

Press

DISC SKIP

on the remote control to skip

discs.

USB playback

1. Insert the USB device’s plug into the main

unit’s USB jack.

2. Press

SOURCE

repeatedly to select the USB

mode.

3. Press

when playback is stopped to

begin playback. Press

during playback

to pause the playback. Press again to
resume the playback.

4. Press

to stop the playback.

5. Unplug the device to disconnect.

• Be sure to remove all discs from
the disc compartment before
moving or transporting the unit!

•

Do not push to force closing of the tray
during CD playback or tray opening.

•

Press

DISC 1/ DISC 2 / DISC 3 / DISC 4

DISC 5

to directly play the entire

single CD. To play all discs in the unit,
press

in the CD mode.

Track/folder selection

1. Press

to skip to the previous or

next track.

2. Press and hold

to search through

a track while it is playing.

3. For USB, mp3/wma disc, press

FOLDER/PRESET

(or

PREV

NEXT

the main unit) to skip to the previous or
next folder.

You can use

FOLDER/PRESET

to select a

track when playback is stopped.
When a track is selected (with track

number/name shows on the display), press

within 10 seconds to start the playback.

Information display

In mp3/wma disc mode, press

BAND/INFO

on the

main unit repeatedly during playback to show
the ID3 tag information (e.g. song title, artist,
album).
When the mp3/wma disc is fully stopped, press

to view the Folders Total (FT) and Track

Total (TT) on the current disc.

In USB mode, press

BAND/INFO

on the main unit

to view used (U) and free (F) memory on the USB
device.

Playback sequence of disc

•

Check that the mp3/wma disc is created with a single folder structure. Refer to the diagram
below for playback sequence details on multi-level folder structure.

•

For example, folders and songs from level 2 are played before moving on to play folders and
songs from level 3.

•

Folder playback sequence is indicated by the letters A to G.

•

Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.

Folder 1

Folder 3

Song 1.1.1
Song 1.1.2
Song 1.1.3

Song 2.2
Song 2.3
Song 2.4

Song 1.2.1.1
Song 1.2.1.2
Song 1.2.1.3

Folder 1.2.1

Song 2.1.1
Song 2.1.2

Folder 2.1

Song 3.1
Song 3.2

Folder 1.1

Folder 1.2

Folder 2

6
7

8
9
10

11
12

LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4

Song 4
Song 5

1
2

Sampling tracks

Press

INTRO

on the remote control to play the

first 10 seconds of each track on the current disc,
all discs in the tray, or turn the intro mode off.
The INTRO icon is displayed when sampling is
activated.

Repeat

Press

BAND/REPEAT

on the remote control to

repeat the current track (REPEAT 1), current disc
(REPEAT 1 DISC) , all discs (REPEAT ALL DISCS), or
turn repeat mode off (ALL DISCS).

Random playback

Press on the remote control to turn on or off
the random playback. The icon is displayed
when it is activated.
All the tracks on one disc will be shuffled and
played once before shuffling and playing tracks
from the next disc.

• The first 99 tracks of each disc
will be shuffled and played once
before any of them is repeated.

•

Random playback can be activated
simultaneously with repeat 1 disc
(randomly play tracks from one disc
repeatedly) or repeat all discs (randomly
play tracks from all discs repeatedly).

Program playback

Setting up a program list

1. While playback is stopped for an audio CD,

mp3/wma disc or USB device, press

to select the tracks to be added to the

program list.

2. Press

ADD

to save the selected track into

the next available program location.

3. Repeat steps 1 to 2 to store more tracks

into program memory.

•

You can create a program of

up to 32 tracks.
•

Only the first 99 tracks from

each disc can be programmed.

Playing a program list

If you are not currently in the program mode,
press

PROG/SET

and then

to start the

program playback.

Displaying the program list

1. While playback is stopped, press

PROG/SET

to enter the program mode.

2. Press

to view each track

assignment in the program list.

Deleting from program list

1. While in the program mode, press

to select the track assignment to

delete.

2. Press

DEL

3. Press

to select “Y” to delete or

“N” to cancel the deletion.

4. Press

DEL

to confirm the selection.

Deleting the entire program

list

1. While in the program mode, press and hold

DEL

2. Press

to select “Y” to delete or

“N” to cancel the deletion.

3. Press

DEL

to confirm the selection.

Recording

Recording CD to USB device

1. Connect the USB device to the main unit.
2. When the CD is paused or stopped, press

CD REC

to start the CD playback and

recording will begin automatically. This is
indicated by the REC icon on the display.

3. Press

CD REC

to stop the recording.

Example

To record only the selected tracks from a CD:
1. Create a CD program (Refer to “Setting Up

a Program List”).

2. From normal playback mode, press

PROG

3. Press

CD REC

, playback and recording will

begin automatically. This is indicated by the
PROG and REC icon on the display.

4. Press

CD REC

to stop recording.

• If CD playback is already
started or paused, recording will
start instantly from the time point
which is playing or paused when

CD REC

is pressed.

•

Recording stops automatically when the
CD stops (e.g. end of disc is reached).

•

The encoding bitrate for CD is 128 kbps.

•

Make sure “write protect” is turned off
in the USB device during recording.

Deleting a file from USB

device

1. In the USB mode, select the file to delete

using

2. Press

DEL

on the remote control.

3. Press

on the main unit to select

“Y” to delete or “N” to cancel the deletion.

4. Press

DEL

to confirm the selection.

Deleting all files from USB

device

In the USB mode, press and hold

DEL

on the

remote control to delete all the files on the USB
device. Repeat steps 3-4 of the above to delete
all the files.

Renaming files

You can rename files in the USB device.
1. In the USB mode, press

PROG/SET

to enter

the rename mode.

2. Adjust

VOLUME

on the main unit or press

VOL +

/ –

to select alphabets.

3. Press

NEXT

on the main unit or

FOLDER/PRESET

on the remote control

to confirm the current alphabet and move
to the next alphabet.

•

Press

DEL

to delete the current alphabet.

•

Press

PREV

FOLDER/PRESET

to edit

the previous alphabet.

4. Press

PROG/SET

to confirm and store the

new file name after editing the last
alphabet.

Radio

Press

SOURCE

repeatedly to enter the tuner

mode.

Selecting tuner band

Press

BAND/INFO

(or

BAND/REPEAT

on the

remote control) to select between the FM or
AM radio band.

Tuning to a station

Press

to adjust frequencies. Press and

hold to start auto seaching for the next available
station.

Manually setting presets

1. Press

to access the desired

frequency.

2. Press

PROG/SET

once. The most recently

accessed program location will be displayed.

3. If a different program location is preferred,

press

on the remote control to

move to the desired preset number (1-32).

4. Press

PROG/SET

to store the selected

frequency at that preset.

Auto preset programming

(FM only)

Press and hold

BAND/INFO

(

BAND/REPEAT

the remote control) for 2 seconds to scan
stations in the FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored.

Beware of your preset channels being erased
accidentally because the scanning and storing
process is automatic upon pressing the button.
You can stop the automatic scan by pressing any
button, but the erased stations cannot be
recovered.

Accessing preset stations

Press

PREV

NEXT

on the main unit or

FOLDER/PRESET

on the remote control

to access the previous or next preset station. The
PROG icon lights up when a preset station is
selected. The display first shows the preset
program number and after a few seconds, the
radio frequency will be displayed.

Suppressing stereo signal

Press

FM ST/INTRO

on the remote control to

select between the FM mono and stereo modes.
“ST” is displayed in the stereo mode.

System does not turn on
•

Check power cord for a secure connection.

•

Unplug the unit for a moment, and then
plug it back in.

•

Check the outlet by plugging in another
device.

There is no sound
•

Increase the volume setting.

•

Check connection to speakers.

•

Check that you have selected the
appropriate function: CD, Tuner or Aux.

•

Make sure mute is off.

•

Make sure headphones are not plugged in.

Poor radio reception
•

Check antenna connection.

•

Move antenna.

•

Turn off nearby electrical appliances, such
as hair dryer, vacuum cleaner, microwave
oven or fluorescent lights.

CD does not play
•

Check that CD is in the tray.

•

Check that CD label is facing up.

•

Check that PAUSE mode is not on.

•

Check that CD function is selected.

•

Use CD lens cleaner.

•

Clean the disc.

•

Try another CD.

Troubleshooting tips

CD sound skips
•

Clean the disc.

•

Check disc for warping, scratches, or other
damages.

•

Check if something is causing the system to
vibrate. If so, move the system.

•

Make sure the speakers are at least 3 feet
away or on a different surface from the
main unit.

CD button does not respond, or does not change
discs when you press DISC SKIP
•

Switch to another function (Tuner) and
then back to CD.

Remote control does not work
•

Check that the batteries are properly
installed.

•

Replace weak batteries.

•

Check that the system is plugged into
power source.

•

Point the remote directly at the system’s
front panel.

•

Move closer to the system.

•

Remove any obstacles between the remote
and the system.

Disconnect the audio system from the power
source before performing any maintenance.

Cleaning

Clean the exterior of the system using a soft
dust cloth.

CD player

CAUTION! This unit operates with laser and may
only be opened by qualified technicians to avoid
accidents.

Handling CDs

•

Do not touch the recorded surface. Hold
the CD by the perimeter or by the
perimeter and the inner edge.

•

Do not affix labels or adhesive tapes to the
label surfaces.

•

Do not scratch or damage the label. CDs
rotate at high speeds inside the player.

•

Do not use damaged (cracked or warped)
CDs

Cleaning CDs

•

Dirty CDs can cause poor sound quality.
Always keep CDs clean by wiping them
gently with a soft cloth from the inner
edge toward the outer perimeter.

•

If a CD becomes dirty, wipe it clean gently
with a wet, soft cloth. Then wipe dry with
a dry cloth.

•

Do not use record cleaning sprays or
antistatic agents on CDs. Also, never clean
CDs with benzene, thinner, or other volatile
solvents which may cause damage to disc
surface.

Maintenance

CD lens care

When your CD lens gets dirty it can also cause
the system to output poor sound quality. To
clean the lens you will need to purchase a CD
lens cleaner which can maintain the output
sound quality of your system. For instructions on
cleaning the CD lens, refer to the ones
accompanying the lens cleaner.

Technical specifications

Power supply: 120V~60Hz
Dimensions ( H x W x D mm):
Main unit - 374 x 310 x 495
Speaker - 374 x 286 x 495
Main unit weight: 7kg
Speaker weight: 5.8kg
CD player: Response curve (+/- 2dB): 60Hz to
5kHz
Rating Plate: Refer to the back of the set.

Warranty

Limited warranty (United

States)

What your warranty covers:

•

Defects in materials or workmanship.

For how long after your purchase:

•

One year from date of purchase for labor
and parts

•

Warranty period for rental units begins
with the first rental or 45 days from date
of shipment to the rental firm, whichever
comes first.

What we will do:

•

Pay any Authorized RCA Audio Service
Center the labor charges to repair your
unit.

•

Pay any Authorized RCA Audio Service
Center for the new or, at our option,
refurbished replacement parts required to
repair your unit.

How you get service:

•

Take your unit to any Authorized RCA
Audio Service Center. To identify your
nearest Authorized RCA Audio Service
Center, ask your dealer, look in the Yellow
Pages, or call 1-800-336-1900.

•

Show the Authorized Service Center
Representative your evidence of purchase
date or first rental.

•

Pick up your unit when repairs are
completed.

•

Proof of purchase in the form of a bill of
sale or receipted invoice which is evidence
that the product is within the warranty
period must be presented to obtain
warranty service. For rental firms, proof of
first rental is also required.

What your warranty does not cover:

•

Customer instruction. (Your Owner’s
Manual describes how to install, adjust, and
operate your unit. Any additional
information should be obtained from your
dealer.)

•

Installation and related adjustments.

•

Signal reception problems not caused by
your unit.

•

Damage from misuse or neglect.

•

Cleaning of audio heads.

•

Batteries.

•

A unit that has been modified or
incorporated into other products or is used
for institutional or other commercial
purposes.

•

A unit purchased or serviced outside the
U.S.A.

•

Acts of nature, such as but not limited to
lightning damage.

Product Registration:

•

Please complete and mail the Product
Registration Card packed with your product.
It will make it easier to contact you should
it ever be necessary. The return of the card
is not required for warranty coverage.

Limitation of Warranty:

•

THE WARRANTY STATED ABOVE IS THE
ONLY WARRANTY APPLICABLE TO THIS
PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE) ARE HEREBY
DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY THOMSON INC.,
ITS AGENTS OR EMPLOYEES SHALL CREATE
A GUARANTY OR IN ANY WAY INCREASE
THE SCOPE OF THIS WARRANTY.

•

REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. THOMSON
INC. SHALL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT. THIS DISCLAIMER OF
WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF

INDIANA. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH
ABOVE.

How State Law relates to warranty:

•

Some states do not allow the exclusion nor
limitation of incidental or consequential
damages, or limitations on how long an
implied warranty lasts, so the above
limitations or exclusions may not apply to
you.

•

This warranty gives you specific legal rights,
and you also may have other rights that
vary from state to state.

If you purchased your unit outside the
United States:

•

This warranty does not apply. Contact your
dealer for warranty information. Service
calls which do not involve defective
materials or workmanship are not covered
by this warranty. Costs of such service calls
are the sole responsibility of the purchaser.

Note

_____________________________________________________________

Note

_____________________________________________________________

IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5

EXPORTER
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206 - 1976
©2007 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)

www.rcaaudiovideo.com

Printed in China / Impreso en China

Installation

To ensure sufficient ventilation, keep the spacing
shown as below:

This audio system has
earned the ENERGY STAR.

Содержание RS2664

Страница 1: ...ol to select among FLAT ROCK POP JAZZ CLASSIC and CUSTOM The display shows your selection briefly Creating a Custom Curve 1 Press EQ on the remote control to select the CUSTOM mode 2 While CUSTOM is displayed press to cycle among the displayed bass and treble range levels 3 While BAS or TRE is displayed adjust the volume to set the associated gain between 10 10 4 Press EQ to exit Important CD and ...

Результаты поиска

Содержание RS2664

Отзывы:

Похожие инструкции для RS2664

Бренды по названию

Популярные бренды

RCA RS2664, Руководство пользователя

Результаты поиска

Содержание RS2664

Отзывы:

Похожие инструкции для RS2664

Бренды по названию

Популярные бренды