4
E3 Alert voice while cycling
（
Whether to read the number while on cycling
mode
）
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key five times, screen displays F6, press “
” screen displays E1, press “
”
two times to display E3
3. Press “
” to confirm, screen displays “0” or “1”
4. Press “
””
” to choose the number you want.
“0” means no voice alert for cycling. If you choose “0” it means, No.1 2 3 4 5 etc. will
show circularly without ringing.
“1” means with voice alert for cycling. If you choose “1” it means, No.1 2 3 4 5 etc. will
show circularly while ringing.
5. Press “
” it will exit to “E3”,
6. Press “
” again to exit setting state
E4 Volume Setting
(Default: 6)
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key five times, screen displays F6, press “
” screen displays E1, press “
”
three times to display E4
3. Press “
” to confirm, screen show “0” (or other numbers)
4. Press “
””
” to choose the number you need.
“1” is mute. 9 is highest volume
.
5. Press “
” it will exit to “E4”,
6. Press “
” again to exit setting state
E5 Brightness setting (Default: 3)
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key five times, screen displays F6, press “
” screen displays E1, press “
”
four times to display E5
3. Press “
” to confirm, screen displays “0” (or other number)
4. Press “
””
” to choose the number you need.
“1” is darkest. “7” is brightest.
5. Press “
” it will exit to “E5”,
6. Press “
” again to exit setting state
E6 Operational sound navigation
0---OFF 1----OPEN
E7
“
Number
”
position
0---Number 001 CALL(English Way)
1---001 Number CALL(Chinese Way)
E8 To be developed
E9 Whether read Counter Number (Suit for queue call system)
0---Please Number xxx go to Counter xx + Service type
1---Please Number xxx go to C Service type
F7 Keyboard Setting (Default: OFF)
E1 Partition Setting
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key six times, screen displays F7, press “
” screen displays E1
3. Press “
” to confirm, screen show “OF” or “ON” or “1” “2” “3” “4” “5” “6” “7” “8” “9”
“0”
“
A
”
“
b
”“
c
”
“
d
”
“
E
”
“OF” means display can’t receive all signals from all different partition’s keyboard
“ON” means display can receive all signal from all different partition’s keyboard number
001-999
“0” or “1” or “2”
……
“E” means display can only receive one partition’s signal
4. Press “
””
” to choose the number you need.
5. Press “
” it will exit to “E1
6. Press “
” again to exit setting state
NOTE: If the keyboard in partition 5, display also chooses 5, means display can receive all
signals 001-999 from keyboard.
F8 Key Settings
E1 Single-key or Multi-key Setting
1---Single key
2---Multi key
