2
E3 Register Alarm Function Transmitters
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, the screen will display E1, press
key two times to E3
3. Press “
” to confirm, the screen will display 001, “1” is flashing, and press “
” “
”
“
” key to choose the number 001-999.
4 Press any key from alarm transmitter, you will hear a voice (success) the number has been
registered successfully and then the number will skip to next one,.
5. Press “
” it will exit to “E3”, press “
” again to exit setting state.
E4 Register Cancel Function Transmitters
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, the screen will display E1, press
key to E4
3. Press “
” to confirm, the screen will show 001, “1” is flashing, and press “
” “
”
“
” key to choose the number 001-999.
44 Press any cancel key from transmitter, you will hear a voice (success) the number has
been registered successfully and then the number will skip to next one.
5. Press “
” it will exit to “E4”, press “
” again to exit setting state
F2 Deletion Mode
E1 Delete Transmitters
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key to display F2, press “
” to display E1
3. Press “
” to confirm, the screen displays 001, “1” is flashing, and press “
” “
” “
”
key to choose the number you want to delete.
4. Press “
” key, you will hear a voice (success),this means number is deleted successfully.
5. Press “
” it will exit to “E1”, press “
” again to exit setting state
E2 Delete Remote Control
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, the screen will display F2, press “
” screen will display E1, press “
”
to display E2
3. Press “
” to confirm, the screen displays 001, “1” is flashing, and press “
” “
” key
to choose the number you want to delete.
4. Press “
” key, you will hear a voice (success), this means number is deleted
successfully.
5. Press “
” it will exit to “E2”, press “
” again to exit setting state
E3 Delete Alarm Function Transmitters
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, the screen will display F2, press “
” screen will display E1, press “
”
two times to show E3
3. Press “
” to confirm, the screen displays 001, “1” is flashing, and press “
” “
” key
to choose the number you want to delete.
4. Press “
” key, you will hear a voice (success), this means number is deleted
successfully.
5. Press “
” it will exit to “E3”, press “
” again to exit setting state
E4 Delete Cancel Function Transmitters
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, the screen will display F2, press “
” the screen will display E1, press
“
” to show E4
3. Press “
” to confirm, screen displays 001, “1” is flashing, and press “
” “
” key to
choose the number you want to delete.
4. Press “
” key, you will hear a voice (success), this means number is deleted
successfully.
5. Press “
” it will exit to “E4”, press “
” again to exit setting state
F3 Display Setting
E1 Display Mode
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key two times to display F3, press “
” the screen will display E1
3. Press “
” to display 1 or 2, and then choose the one you need
“1” means live mode- -means when No.1 No.2 No.3 call in turn, the screen shows 003
002 001. Newest call number shows on the top of screen.
“2” means queue mode- -means when No.1 No.2 No.3 call in turn, the screen shows 001
002 003. Oldest call number shows on the top of screen.
4. Press “
” it will exit to “E1”, then it is s successful.
5. Press “
” again to exit setting state
