3
E2 Storage Number
1. Press “
” key 2 seconds, the screen displays F1
2. Press “
” key two times, screen displays F3, press “
” screen displays E1, press “
”
to display E2
3. Press “
” to confirm, press “
””
” to choose the number from 01-99
4. Press “
” it will exit to “E2”.
5. Press “
” again to exit setting state
F4 Logout Setting (Remove Timing Setting)
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key three times, screen displays F4, press “
” screen displays 00(or other
numbers).
3. Press “
””
” to choose the number from 00-99
“00” means the number will display on the screen until it is canceled.
“01-99” means the last call display time. If you choose 50, it means last number will
display for 50 seconds on the screen. When time the time is up, this number will be deleted
automatically
4. Press “
” it will exit to “F4”, then it is s successful.
5. Press “
” again to exit setting state
F5 Cycle Mode
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key four times, screen displays F5, press “
” screen show 00(or other
number)
3. Press “
””
” to choose the number from 00-99
“00” means the number will not cycle every second
“01-99” means the time of number display cycling. For example, if you choose 10
seconds, it means each 10 seconds number will cycle one time.
4. Press “
” it will exit to “F5.
5. Press “
” again to exit setting state
F6 Voice Setting
E1 Voice Mode
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key five times, screen displays F6, press “
” screen displays E1
3. Press “
” to confirm, screen displays 0(or other number)
4. Press “
””
” to choose the number from 0-7
“0” means English pronunciation (number and service type)
“1” means English pronunciation (number only)
“2” means English pronunciation (eg.No.105: One hundred and five + service type)
“3” means English pronunciation (eg.No.105: One hundred and five)
“4” means Ding Dong voice alert
“5” means music alert 1
“6” means music alert 2
“7” means warning sound
5. Press “
” it will exit to “E1.
6. Press “
” again to exit setting state
E2 The times of Voice Announcements (Default:1 time)
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key five times, screen displays F6, press “
” screen displays E1, press “
”
to display E2
3. Press “
” to confirm, screen displays 1(or other number)
4. Press “
”
“
” to choose the number from 1 to 9. (The number means the times of
repeating announcements)
5. Press “
” it will exit to “E2”,
6. Press “
” again to exit setting state
