Chevrolet Tavera BS3 Скачать руководство пользователя страница 196

Страница: 196 / 228

1. Vehicle :

The Motor Vehicle approved for sale within India under the provisions of Central Motor Vehicle Rules, 1989 or any subsequent

amendment or substitution thereof.

2. Owner Manual (OM) :

A document given to the customer at the time of sale of the vehicle giving guidelines on use and maintenance of the vehicle

including the terms and conditions of Warranty.

3. Maintenance :

Maintenance as per the schedule provided in the owner’s manual by GMI including inspection, verification check, adjustment and

replacement, if necessary.

4. Logbook :

The scheduled service record book, which shall be issued at the time of first sale to the customer.

5. Abnormal Use :

The situations when the vehicle is put to use other than that intended by GMI such as racing, overloading or use of adulterated

fuel or fuel not recommended by GMI.

6. Manufacturing Defect :

Means deficiency or deviation from normal production tolerance in design, material, or workmanship in a device or

system which affects any parameter, performance, or component belonging to emission control system.

7. Product Warranty :

The manufacturer warranty as provided by GMI, which covers failure of various parts and systems as per the OM.

3 years / 1,00,000 kms (Whichever is earlier).

8. Emission Warranty :

Warranty for emission performance of the vehicle as determined by sub-rule (2) of rule no 115 of the Central Motor Vehicles

Rules, 1989.

9. Authorized Service Centers :

Any service facilities authorised by GMI to perform warranty repairs. This shall include all of GMI dealerships that

are recognised for service of subject vehicles or any other service center duly authorised by GMI.

10. Warrantable

Condition

Warrantable condition means any condition of a vehicle, which triggers the responsibility of GMI to take corrective action

within the framework of Emission Warranty. This however shall not include any statutory or regulatory fines or penalties.

11. Warranted

Parts :

Those components, listed as per Annexure –II.

Annexure-I

Definitions:

190

Содержание Tavera BS3





































































































































































































































Результаты поиска

Содержание Tavera BS3

Отзывы:

Похожие инструкции для Tavera BS3

Бренды по названию

Популярные бренды

Chevrolet Tavera BS3, Руководство пользователя

Результаты поиска

Содержание Tavera BS3

Отзывы:

Похожие инструкции для Tavera BS3

Бренды по названию

Популярные бренды