Black plate (8,1)
Chevrolet Spark EV Owner Manual (GMNA-Localizing-U.S./Canada-
5853485) - 2014 - CRC - 4/2/13
3-8
Seats and Restraints
To return the rear seats to the
normal seating position:
1. Insert the safety belt latch plate
into the hole on the side trim
before raising the seatback.
The safety belt should not cross
the seatback locking mechanism
when raising the seatback.
2. Lift the seatback up slightly and
reinstall the head restraint. See
“
Head Restraint Removal and
Reinstallation
”
under
Lower
Anchors and Tethers for
Children (LATCH System) on
page 3-38
.
3. Push the seatback rearward all
the way to lock it in place.
4. Push and pull the top of the
seatback to be sure it is locked
into position.
5. Remove the safety belt from the
hole on the side trim.
6. Repeat Steps 1
–
5 for the other
seatback and seat cushion,
if necessary.
If added cargo space is not needed,
the seatbacks should be kept in the
upright, locked position
Safety Belts
This section of the manual
describes how to use safety belts
properly. It also describes some
things not to do with safety belts.
{
Warning
Do not let anyone ride where a
safety belt cannot be worn
properly. In a crash, if you or your
passenger(s) are not wearing
safety belts, injuries can be much
worse than if you are wearing
safety belts. You can be seriously
injured or killed by hitting things
inside the vehicle harder or by
being ejected from the vehicle. In
addition, anyone who is not
buckled up can strike other
passengers in the vehicle.
It is extremely dangerous to ride
in a cargo area, inside or outside
of a vehicle. In a collision,
passengers riding in these areas
(Continued)