Black plate (36,1)
Chevrolet Spark EV Owner Manual (GMNA-Localizing-U.S./Canada-
5853485) - 2014 - CRC - 4/2/13
9-36
Driving and Operating
DC Charging
AC/DC Charge Cord Handle (If
Equipped)
Start Charge
1. Make sure the vehicle is parked
and turned off.
2. Push the
m
on the charge
port door in and release to open
the door.
In cold weather conditions, ice
may form around the charge port
door. The charge port door may
not open on the first attempt.
Remove ice from the area and
repeat attempting to open the
charge port door.
3. Unlatch the DC charging dust
cover and lower it fully.
4. Plug in the DC vehicle plug into
the DC charge port on the
vehicle. Make sure that the DC
vehicle plug is fully connected to
the DC charge port. If it is not
properly seated then the charge
may not occur.
5. Follow the steps listed on the
charging station to start
charging. The electric park brake
will automatically apply once the
charge process has been
started.
6. Once charging, the DC vehicle
plug will be locked to the DC
charge port and cannot be
disconnected while charging is
active.
{
Caution
Do not attempt to disconnect the
DC vehicle plug while charging is
active. This action may damage
vehicle or charging station
hardware.
Stop Charge
Controls on the charging station can
be used to stop the charge process
at any time.
To stop charging, the stop charge
button on the RKE transmitter may
also be used. This applies only to
DC charging.