Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
Storage
63
3. Pull up the release knob on the top of
the seatback.
4. Fold the backrest forward and down.
5. Put the seat belts for the outboard seats
into the belt guides.
To return the backrest to the original
position, lift backrest up and pull out the
seat belt from the belt guides.
Push backrest firmly into place.
{
Warning
When folding up, ensure that backrests
are securely locked in position before
driving. Failure to do so may result in
personal injury or damage to the load or
vehicle in the event of hard braking or a
collision.
Make sure the seat belts are not pinched by
the latch.
The centre rear seat belt may lock when
you raise the backrest. If this happens, allow
the belt go back all the way and repeat
operation.
If the seat belt is still locked, turn down the
seat cushion and try again.
To return the rear seat cushion, put the rear
part of the seat cushion in its original
position ensuring that the seat belt buckle
straps are not twisted or caught under the
seat cushion, then push the front part of the
seat cushion firmly down until it latches.
Caution
When returning rear seat backrest to the
upright position, place the rear seat belt
and buckles between the rear seat
backrest and one cushion. Make sure the
rear seat belt and buckles do not get
pinched under the rear seat cushion.
Make sure the seat belts are not twisted
or caught in the seat backrest and are
arranged in their proper position.
Notice:
The luggage compartment shall
contain all fittings installed in production by
the car manufacturer (spare wheel, jack,
etc.). Other features, either not installed or
only optional, such as first-aid-kit or fire
extinguisher, shall not be considered.
Where special features such as a folding or
removable rear seat of backrest have been
provided by the manufacturer to obtain
maximum loading volume, the
measurements shall be made with the
following loading limits.
