Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
146
Vehicle Care
Type 1
Type 2
2. Remove the turn signal lamp or Type 1
DRL bulb rotating anticlockwise.
3. Remove the bulb from the bulb holder
by pulling straight out.
4. Install a new bulb into the bulb holder.
5. Reinstall the bulb holder into the lamp
assembly by rotating clockwise.
6. Check fitting a wiring harness in the
right position.
7. Check lamp operation.
Taillamps
Taillamps, turn signal, stoplamps, and
back-up lamps
1. Unscrew both screws.
2. Remove tail light assembly. Take care
that the cable duct remains in position.
3. Taillamp/stoplamp (1)
Turn signal lamp (2)
Back-up lamp(Passenger's side)/Rear fog
lamp(Driver's side) (3).