Chevrolet 2010 Traverse, Руководство пользователя

Страница: 242 / 448

7-56 Infotainment System
Three-Way Calling
Three-Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press
b g
. The
system responds with “ Ready ”
followed by a tone.
2. Say “ Three-way call ” .
The system responds with
“ Three-way call, please say
dial or call ” .
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
b g
to link all the callers
together.
Ending a Call
Press
c x
to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To Mute a call
1. Press
b g
. The system
responds with “ Ready ” followed
by a tone.
2. Say “ Mute Call ” . The system
responds with “ Call muted ” .
To Cancel Mute
1. Press
b g
. The system
responds with “ Ready ” followed
by a tone.
2. After the tone, say “ Mute Call ” .
The system responds with
“ Resuming call ” .
Transferring a Call
Audio can be transferred between
the in-vehicle Bluetooth system and
the cell phone.
To Transfer Audio to the Cell
Phone
During a call with the audio in the
vehicle:
1. Press
b g
. The system
responds with “ Ready ” followed
by a tone.
2. Say “ Transfer Call. ” The system
responds with “ Transferring call ”
and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the In-Vehicle
Bluetooth System
The cellular phone must be paired
and connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
key is turned to the ON/RUN or
ACC/ACCESSORY position.
During a call with the audio on the
cell phone, press
b g
for more
than two seconds. The audio
switches from the cell phone to
the vehicle.