Chevrolet 2010 Traverse, Руководство пользователя

Страница: 240 / 448

7-54 Infotainment System
3. Say the entire number without
pausing.
. If the system recognizes
the number, it responds
with
“ OK, Dialing ” and dials
the number.
. If the system does not
recognize the number, it
confirms the numbers
followed by a tone. If the
number is correct, say
“ Yes ” . The system responds
with “ OK, Dialing ” and dials
the number. If the number
is not correct, say
“ No ” .
The system will ask for the
number to be re-entered.
Using the Digit Dial Command
1. Press and hold
b g
for
two seconds. The system
responds with
“ Ready ” followed
by a tone.
2. Say “ Digit Dial ” . The system
responds with “ Digit dial using
<phone name>, please say the
first digit to dial
” followed by
a tone.
3. Say the digit to be dialed one at
a time. Following each digit, the
system will repeat back the digit
it heard followed by a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say
“ Dial ” . The
system responds with “ OK,
Dialing ” and dials the number.
. If an unwanted number is
recognized by the system,
say
“ Clear ” at any time to
clear the last number.
. To hear all of the numbers
recognized by the system,
say
“ Verify ” at any time and
the system will repeat them.
Using the Call Command
1. Press and hold
b g
for
two seconds. The system
responds with
“ Ready ” followed
by a tone.
2. Say “ Call ” . The system responds
with “ Call using <phone name>.
Please say the name tag ”
followed by a tone.