Chevrolet 2010 Traverse Скачать руководство пользователя страница 213

Страница: 213 / 448

Infotainment System

7-27

Using the Radio to Control a
USB Storage Device or iPod

The radio can control a USB
storage device or an iPod using the
radio buttons and knobs and display
song information on the radio

’

display.

(Tune):

Turn to select files.

SEEK:

Press to go to the

start of the track, if more than
ten seconds have played. Press
and hold or press multiple times to
continue moving backward through
tracks.

SEEK:

Press to go to the next

track. Press and hold or press
multiple times to continue moving
forward through tracks.

REV (Reverse):

Press and

hold to reverse playback quickly.
Sound is heard at a reduced
volume. Release

REV to

resume playing. The elapsed
time of the file displays.

FWD (Fast Forward):

Press

and hold to advance playback
quickly. Sound is heard at a reduced
volume. Release

FWD to

resume playing. The elapsed
time of the file displays.

(Information):

Press to display

additional information about the
selected track.

Using Softkeys to Control a
USB Storage Device or iPod

The five softkeys below the radio
display are used to control the
functions listed below.

To use the softkeys:

1. Press the first or fifth softkey

below the radio display to
display the functions listed
below, or press the softkey
below the function if it is
currently displayed.

2. Press the softkey below the tab

with the function on it to use that
function.

(Pause):

Press the softkey

below

to pause the track. The tab

appears raised when pause is being
used. Press the softkey below

again to resume playback.

Back:

Press the softkey below the

back tab to go back to the main
display screen on an iPod, or the
root directory on a USB storage
device.

(Folder View):

Press the

softkey below

to view the

contents of the current folder on
the USB drive. To browse and
select files:

1. Press the softkey below

2. Turn

to scroll through the list

of folders.

3. Press

to select the folder.

If there is more than one folder,
repeat Steps 1 and 2 until the
folder is reached.

Содержание 2010 Traverse

































































































































































































































































































































































































































































Результаты поиска

Содержание 2010 Traverse

Отзывы:

Бренды по названию

Популярные бренды

Chevrolet 2010 Traverse, Руководство пользователя

Результаты поиска

Содержание 2010 Traverse

Отзывы:

Бренды по названию

Популярные бренды