Black plate (11,1)
Chevrolet Tahoe/Suburban Owner Manual - 2010
If you use the remote keyless entry transmitter to enter
your vehicle and the remote recall memory feature is
on, automatic seat, adjustable mirror, and adjustable
pedal movements will occur. See
“
MEMORY SEAT
RECALL
”
under
DIC Vehicle Customization (With DIC
Buttons) on page 4
‑
73
for more information.
To stop recall movement of the memory function at any
time, press one of the power seat controls, memory
buttons, power mirror buttons, or adjustable pedal
switch.
If something has blocked the driver
’
s seat and/or the
adjustable pedals while recalling a memory position, the
driver
’
s seat and/or the adjustable pedals recall may
stop working. If this happens, remove the obstruction
and press the appropriate control for the area that is not
responding for two seconds. Try recalling the memory
position again by pressing the appropriate memory
button. If the memory position is still not recalling, see
your dealer for service.
Easy Exit Seat
The control for this feature is located on the driver
’
s
door panel between buttons 1 and 2.
With the vehicle in P (Park), the driver's seat exit
position can be recalled by pressing the exit button. You
will hear a single beep, and the driver
’
s seat will move
back approximately 8 cm (3 in). To move the seat back
further, press the exit button again until the seat is all
the way back.
If the easy exit seat feature is programmed in the Driver
Information Center (DIC), automatic seat movement will
occur when the key is removed from the ignition. See
“
EASY EXIT SEAT
”
under
DIC Vehicle Customization
(With DIC Buttons) on page 4
‑
73
for more information.
The memory seat and easy exit features can also be
programmed using the DIC.
For programming information, see
DIC Vehicle
Customization (With DIC Buttons) on page 4
‑
73
.
2-11