Black plate (60,1)
Chevrolet Tahoe/Suburban Owner Manual - 2010
License Plate Lamp
1. Remove the two screws holding each of the
license plate lamps to the molding that is part of
the liftgate.
2. Twist and pull the license plate lamp forward
through the molding opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
Replacement Bulbs
If your vehicle is a Two-mode Hybrid, see the
Two-mode Hybrid manual for more information.
Exterior Lamp
Bulb Number
Back-Up Lamp
7441
License Plate Lamp
W5W
Rear Turn Signal Lamp, Taillamp, and
Stoplamp
3057
For replacement bulbs not listed here, contact your
dealer.
6-60