Chevrolet 2010 Cobalt, Руководство пользователя

Страница: 346 / 456

When rotating the vehicle's tires, always use the
correct rotation pattern shown here.
Do not include the compact spare tire, if the
vehicle has one, in the tire rotation.
After the tires have been rotated, adjust the front
and rear inflation pressures as shown on the Tire
and Loading Information label. See
Inflation - Tire
Pressure on page 6 ‑ 66 and Loading the Vehicle on
page 5 ‑ 25 .
If the vehicle has the Tire Pressure Monitor
System (TPMS), reset the TPMS sensors after
rotating the tires. See
Tire Pressure Monitor
Operation on page 6 ‑ 68 .
Make certain that all wheel nuts are properly
tightened. See
“ Wheel Nut Torque ” under
Capacities and Specifications on page 6 ‑ 131 .
{
WARNING:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after time. The wheel could
come off and cause an accident. When you
change a wheel, remove any rust or dirt
from places where the wheel attaches to
the vehicle. In an emergency, you can use
a cloth or a paper towel to do this; but be
sure to use a scraper or wire brush later,
if needed, to get all the rust or dirt off.
See
Changing a Flat Tire on page 6 ‑ 92 .
6-74