Setting Cruise Control
{
CAUTION:
If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.
The cruise control pad is
located on the inboard
side of the steering wheel.
1. Press the ON/OFF button to turn on the cruise
control.
2. Accelerate to the speed you want.
3. Press the SET button and release it. An indicator
light on the instrument panel cluster comes on to
show that the cruise control is on. See Cruise
Control Light on page 3-38.
4. Take your foot off the accelerator pedal.
Resuming a Set Speed
If the cruise control is set to a desired speed and then
turned off by applying the brake or clutch pedal,
if you have a manual transmission, this shuts off the
cruise control. However, it does not need to be
reset. Once you are going about 24 mph (39 km/h) or
more, briefly press the RESUME button.
The vehicle will go back to the previously set speed and
stay there.
If the RESUME button is held, the vehicle keeps going
faster until the button is released or you apply the
brake pedal. Do not hold the RESUME button, if you do
not want the vehicle speed to keep increasing.
3-11
Содержание 2008 Optra
