Chevrolet 2004 Impala Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 410

Chevrolet 2004 Impala Скачать руководство пользователя страница 140

Delayed Exit Lighting

This feature illuminates the interior for a period of time
after the key is removed from the ignition.

The ignition must be off for delayed exit lighting to work.
When the key is removed, interior illumination will
activate and remain on until one of the following occurs:

•

The ignition is moved to ON,

•

the power door locks are activated, or

•

an illumination period of 25 seconds has elapsed.

If during the illumination period a door is opened,
the timed illumination period will be canceled and the
interior lamps will remain on because a door is open.

Parade Dimming

The instrument panel has an added feature called
parade mode. This feature prohibits the dimming of your
instrument panel displays during the daylight while
the headlamps are on so that you’ll still be able to see
the displays.

Reading Lamps

Your vehicle may be equipped with reading lamps that
are located on the assist handles in the headliner.
These lamps and the interior courtesy lamps come on
when any door is opened. Press the lens to turn them on
and off.

Dome Lamp

If your vehicle has this feature, the dome lamp will
come on when you open a door. You can also turn this
lamp on by turning the exterior lamps control clockwise
as far as it will go. Vehicles that have the optional
sunroof do not have a dome lamp.

Battery Rundown Protection

Your vehicle has a feature to help prevent you from
draining the battery in case you accidentally leave on the
interior courtesy lamps, reading/map lamps, visor
vanity lamps or trunk lamp. If you leave any of these
lamps on, they will automatically turn off after
10 minutes, if the ignition is off. The lamps won’t come
back on again until you do the following:

•

Turn the ignition on, or

•

turn the exterior lamps control off, then on again.

If your vehicle has less than 15 miles (25 km) on
the odometer, the battery saver will turn off the lamps
after only three minutes.

Battery rundown protection will also work if the
headlamps are left on. After having been left on for
10 minutes, the headlamps and the parking lamps will
flash three times. They will remain on for one more
minute before turning off automatically.

3-18

«
...
138
139
140
141
142
...
»

Содержание 2004 Impala



























































































































































































































































































































































































































Отзывы:

Нет отзывов