Chevrolet 2004 Impala Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 410

Chevrolet 2004 Impala Скачать руководство пользователя страница 115

LT DELAY (Delayed Headlamp
Illumination)

This feature allows the headlamps and parking lamps to
stay on for a fixed amount of time after you exit the
vehicle, or for them to turn off immediately.

Programmable Modes

Mode 1: OFF

Mode 2: 30 SEC

Mode 3: 60 SEC

Your vehicle was originally programmed to Mode 2.
The mode may have been changed since then.
To determine the current mode, or to change the mode,
do the following:

1. Scroll, using the SEEK/PSCAN up or down arrows,

until LT DELAY appears on the display.

2. Press the PREV or NEXT button to enter the

submenu. The current selection will have an
asterisk (*) next to it. If you do not wish to change
the current mode, you can either exit the
programming mode by following the directions later
in this section or program the next feature
available on your vehicle.

3. Scroll, using the PREV or NEXT buttons, through

the modes to change the current mode.

4. With your preference displayed, press the

TUNE/DISP button to select. A chime will be heard
to verify the new setting. The new selection will
be displayed with an asterisk (*) for one second.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

AUTOLOCK (Automatic Door Lock and
Unlock)

With the ignition in ON and the doors closed, this
feature allows the vehicle doors to automatically lock
and unlock when the driver shifts the transaxle into and
out of PARK (P), or to turn the feature off.

Programmable Modes

Mode 1: OFF

Mode 2: LCK ONLY — Automatic door lock
on/automatic door unlock off.

Mode 3: DRVR UNL — Automatic door lock
on/automatic door unlock on (driver’s door only).
Automatic door lock on/automatic door unlock on
(driver’s door only).

Mode 4: ALL UNL — Automatic door lock on/automatic
door unlock on.

2-47

«
...
113
114
115
116
117
...
»

Содержание 2004 Impala



























































































































































































































































































































































































































Отзывы:

Нет отзывов