CHESTER Super Lux Mill, Руководство по эксплуатации

Страница: 7 / 17

7
Precaution for operation
Check all parts for proper condition before operation; if normal safety precautions are
noticed carefully, this machine can provide you with standing of accurate service.
1. Before operation
a) Fill the lubricant.
b) In order to keep the accurate precision, the table must be free from dust and oil
deposits.
c) Check to see that the tools are correctly set and the work-piece is set firmly.
d) Be sure the speed is not set too fast.
e) Be sure everything is ready before use.
2. After operation
a) Turn off the electric switch.
b) Turn down the tools.
c) Clean the machine and coat it with lubricant.
d) Cover the machine with cloth to keep out the dust.
3. Adjustment of head
a) Head may be rotated 360°by loosening the two heavy duty head lock nuts. Adjust the
head to the desired angle, and then fix the heavy duty head lock nuts. It is tighten the
same time to fix the head if drilling too much.
b) Unscrew nuts while the work-piece needs to be bevel drilling turn to the degrees you
wish on the scale, and then screw the nuts.
Fig.2
4. Preparing for drilling (see Fig.3).
Turn off the knob make loose the taper body of worm gear and spring base. Then we
decide spindle stroke setting the positive depth stop gauge for drilling blind hole or Free
State for pass hole.
5. Preparing for milling (see FIG.3)
a) Adjust the positive depth stop gauge to highest point position.
B) Turn tight of the knob is use to taper friction force coupling the worm gear and
spring base. Then turning the handle wheel by micro set the spindle of work piece
machining height.