CHESTER Super Lux Mill, Руководство по эксплуатации

Страница: 2 / 17

2
Warning: Failure to follow these rules may result in serious personal injury!
As with all machine there are certain hazards involved with the operation and use of the
machine. Using the machine with respect and caution will considerably lessen the
possibility of personal injury, if normal safety procedures are overlooked or ignored, the
operator could be injured or the machine may be damaged.
This machine was designed for certain applications only. We strongly recommend that
this machine is not modified and/or used for any other operation other than for which it was
designed.
Safety Rules
1. For your own safety, read this instruction manual carefully before operating the
machine, learn the machine application and limitations as well as the specific hazards
particular to this type of machine.
2. Keep guards in place and in working order.
3. Make sure that the machine is correctly grounded. If the machine is with a three
pronged plug, it should be plugged into a three prong socket. If an adaptor is used to
accommodate a two-prong socket, the adaptor lug must be attached to a known ground.
Never remove the third prong.
4. Remove any adjusting keys and wrenches, form a habit of checking to see that keys
and adjusting wrenches are removed from the machine before turning it on.
5. Keep the work area clean. Cluttered areas and benches invite accidents.
6. Do not use this machine in dangerous environments, do not used this machine in damp
or wet locations or expose it to rain. Keep the work area well lit.
7. Children and visitors should be kept away from the machine and a safe distance from
the work area.
8. Make the workshop “childproof” with padlocks, master switches or by removing starter
switches.
9. Do not force a tool or an attachment to perform a task for which it was not designed.
10. Wear proper safety apparel, loose clothing, gloves, neckties, rings, bracelets and other
jewellery to ensure that they do not get caught in moving parts. Non-slip footwear is
recommended as is protective hair coverings to contain long hair.
11. Always wear eye protection such as goggles or glasses. Always use a face mask if
machining materials that create dust.
12. Make sure that the workpiece is securely clamped, use a vice or suitable clamps.
Never use hands to hold a workpiece.
13. Don’t overreach, keep a proper footing and balance at all times.
14. Keep tools in top condition, keep tools sharp and clean for the best and safest
performance and follow instructions for lubricating and changing accessories.
15. Disconnect the power before carrying out any maintenance or changing accessories
such as blades, bits and cutters etc.
16. Only use recommended accessories, the use of improper accessories may cause