CHESTER Craftsman, Инструкция по эксплуатации

Страница: 12 / 53

Cutting Tools
The tool used in a lathe is known as a single point cutting tool. It has one cutting edge or point whereas a
drill has two cutting edges and a file has numerous points or teeth.
The lathe tool shears the metal rather than cuts as will be seen later and it can only do so if there is
relative motion between the tool and the work piece. For example, the work is rotating and the tool is
moved into its path such that it forms an obstruction and shearing takes place. Of course the amount of
movement is of paramount importance ­ too much at once could for instance result in breakage of the
tool.
Figure 3. Types of Cutting Tool
The type and design of the tools selected will depend on the job in hand, the machining operation
selected and the material to be cut. The correct tool especially the various face angles are essential if the
operation is to be done in a cost­effective (i.e. productive) way. The tools used in a lathe are various,
some of which are shown in figure 3.
The range of cutting tool types is extensive and a few examples only are shown in this handout.
Nonetheless you should take every opportunity to look deeper into the types of tools available.
Chester UK Craftsman Lathe
11