CHESTER 836 TURRET MILL, Руководство по эксплуатации

Страница: 9 / 23

9
Controls
A.
Belt Cover Lock Knobs
(A, Fig. 4)-located
on the right side of the head. Loosen and
remove belt cover to change belt position on
the pulleys.
B.
Spindle Brake
(B, Fig. 4)-located on left
side of the head. Move in either direction to
stop spindle once power has been turn off.
C.
Quill Feed Handle
(C, Fig. 4)-located on the
right side of the head. Rotate
counter-clockwise to lower spindle. Return
spring will retract the spindle automatically
once the handle is released.
D.
Quill Lock
(D, Fig. 5)-located on the right
side of the head. Rotate the handle
clockwise to lock the quill in a desired
position. Rotate the handle
counter-clockwise to release.
E.
Micrometer Adjusting Nut
(E, Fig.
4)-located on the front of the head. Use for
setting specific spindle depth.
F.
Manual Fine Feed
(F, Fig. 4)-located on the
left side of the head. Must engage fine
feed (I, Fig. 5) for hand wheel to function.
G.
Quill Stop
(G, Fig. 4)-located on the front of
the head. Used in conjunction with
micrometer adjusting nut for predetermined
depth.
H.
Reversing Switch
(H, Fig. 5)-located on the
left side of the head. Switches rotation of
spindle. For 3 Ph motor there is an
additional low and high-speed option.
I.
Fine Feed Engagement
(I, Fig. 5)-located
Fig.4
Fig.5