CHESTER 836 TURRET MILL, Руководство по эксплуатации

Страница: 11 / 23

11
2.
Saddle Gib Adjustment
-(#47, page 19)
adjust gib screw (#18, page 19) found on the
right side front of the carriage for proper
travel and excess play.
3.
Table Gib Adjustment
-(#45, page 17)
adjust gib screw (#18, page 17) found on the
left side of the table toward the front of the
carriage for proper travel and excess play.
4.
Ram Ware Plate
-(#10, page 19) adjust two
set screws (#19, page 19) found on the side
of the ram for proper travel.
5.
Head Alignment
-the scales on the ram
adapter and head rotation are guides only.
Close tolerance work will require the use of
a dial indicator to make sure the head is 90º
to the table in the X axis.
6.
Longitudinal & Cross feed Adjustment-
if
there is excessive backlash in the handle.
a) Loosen hex socket head screw (#27,
page 17).
b) Turn feed screw nut (#26 or 29, page 17)
to remove play.
c) Tighten hex socket head screw.