Chesney's EFB1200, Руководство пользователя

Страница: 9 / 12

9
2. SMART HOME SYSTEM CONNECTION
When the Smart Home System driver is installed, it can be used to:
- Turn on the appliance (if READY message is on display).
- Turn off the appliance (if COOLING THE DEVICE or READY message is on display)
- Increase or lower the flame height of the appliance during use.
The following appliance modes can be seen the Smart Home System control panel:
- ready to start (message READY)
- working (message WORKING)
- lack of fuel (message NO FUEL)
- waiting (message WAITING or COOLING THE DEVICE)
- ERROR
Description of Smart Home System ports:
INPUT 12-24 VDC A B C D
INFORMATION
CONTROL
GDN COM DC-V START STOP UP DOWN
Description of electrical connectors:
GND - COM DC -V
START - 12 DC +V input initializing the appliance, signal as an impulse lasting 100ms up to 1s.
STOP - 12 DC+V input turning off the appliance, signal as an impulse lasting 100ms up to 1s.
UP - 12 DC +V input increasing the flame, signal as an impulse lasting 100ms up to 1s.
DOWN - 12 DC+V input decreasing the flame, signal as an impulse lasting 100ms up to 1s.
A-READY - transmitter output signalling that the appliance is ready.
B-WORKING - transmitter output signalling that the appliance is working.
C-FUEL - transmitter output signalling lack of fuel.
C-FUEL - transmitter output signalling error/other.
A+B - transmitter output.