Chesney's EFB1200, Руководство пользователя

Страница: 4 / 12

4
The assigned IP address is a dynamic address and is subject to change in the
event of a change in the network settings.
It may happen that the displayed IP is incorrect. In such a case follow the
instructions below:
0.0.0.1 No communication with
the module at all
It is normal during the initialization of the
product. If it does not disappear after
several minutes after turning on the
appliance, begin to format the USB flash
drive again.
0.0.0.2* No connection with the
network (wrong data / IP
is busy / no network)
Follow the procedure of giving the network
parameters once more - install the USB
flash drive again.
0.0.0.3 Text mode - jumper was
not downloaded
Follow the procedure of giving the network
parameters once more - install the USB
flash drive again. Call SERVICE
127.0.0.1 No connection with the
network (wrong data / IP
is busy / no network)
Follow the procedure of giving the network
parameters once more - install the USB
flash drive again.
* In case of problems connecting to the fireplace via user’s WiFi network (error
no. 0.0.0.2) due to low network signal:
- remove the seal located in the front of the appliance indicated with a sticker