Chery TIGGO, Руководство пользователя, Страница: 114 / 154

Emergency Procedure
113
Disconnect Lead
First disconnect lead B (-) and then lead A (+).
Breakdown Trailer
The vehicle is equipped with threaded holes for
trailer rings at both the front and the rear.
During the trailing, drive the trailer slowly and
smoothly to prevent the trailer and the trailed
vehicle from bouncing. If the pulling force of the
trailing cable is too big, the vehicle may be
damaged.
During the trailing, the ignition
switch of the trailed vehicle shall be in the
“ON” position so that the steering wheel, the
turn lamp and the brake lamp can all work.
Since the engine is turned off, there neither
is nor is the braking or steering force, so
greater operating force needed. Therefore,
the braking and steering forces shall be
increased accordingly. The 4*4 vehicle
wheels shall not be off ground during
trailing, or else the driving mechanism will
be damaged.
Please do not turn on the headlamps
in stead of the heated rear windshield, for the
surge voltage may burn and damage the
bulbs.
To reduce the voltage surge during
the disconnection, please connect the blower
and the electric-heated rear windshield of the
vehicle with the low battery.